LABVIEW智能小车毕业设计(含外文翻译)
《LABVIEW智能小车毕业设计(含外文翻译)》由会员分享,可在线阅读,更多相关《LABVIEW智能小车毕业设计(含外文翻译)(78页珍藏版)》请在毕设资料网上搜索。
1、 I 摘要摘要 清华大学承办的第五届“飞思卡尔”杯全国大学生智能车大赛,要求 参赛者在提供的模型车体及主控制器芯片基础上, 设计制作具有自主道路 识别能力的智能赛车,在赛道上以最快速度完成赛程者为优胜。 本课题以智能车比赛为背景, 以缩短智能车控制算法的开发周期为目 的,基于虚拟仪器 LabVIEW 开发了智能车仿真软件,为智能车比赛提供 可以离线验证控制算法的软件平台。 本文首先对智能车仿真模拟系统的运行模型进行了分析, 主要包括赛 道设计、赛车设计、进行仿真和结果回放四个部分,然后根据这几部分进 行软件开发, 但在实际开发中并没有完成所有功能, 只完成了其中智能车 仿真系统的一部分,并对该
2、部分的开发过程进行了详细的分析。 关键词关键词:LabVIEW;仿真;智能车;虚拟仪器 II ABSTRACT Tsinghua University hosted the firth college student competition, the “Freescale“ Cup. The participants are required to provide the intelligent vehicle model capacity of the self-road-recognize based on the designed model-car and the micro-cont
3、roller chip. The winner was the first one finished the race on the right road. Based on this competition, this paper, aims at reducing the development period of the control algorithm, provides the software platform for the off-line test of the race car control algorithm by using LabVIEW. This paper
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- LABVIEW 智能 小车 毕业设计 外文 翻译
