三跨预应力混凝土连续梁桥毕业设计计算书
《三跨预应力混凝土连续梁桥毕业设计计算书》由会员分享,可在线阅读,更多相关《三跨预应力混凝土连续梁桥毕业设计计算书(103页珍藏版)》请在毕设资料网上搜索。
1、1 摘要摘要 在本设计中,根据地形图和任务书要求,依据现行公路桥梁设计规范提出了两种预应 力混凝土连续梁桥、拱桥三种桥型方案。经过对各种桥型的比选最终选择三跨预应力混凝 土连续梁桥为本次的推荐设计桥型方案。 本设计应用 Midas 软件对预应力混凝土连续梁桥进行结构分析,根据拟定的桥梁尺寸 建立桥梁基本模型,对主梁恒载内力和活载内力进行计算,并进行内力组合得到内力包络 图。然后进行预应力钢束估算和预应力损失的计算。最后对结构进行强度和应力验算以及 行车道板的计算。经过分析验算表明该设计计算方法正确,基本满足要求。 关键词关键词:Midas 软件;混凝土连续梁桥;内力;结构分析;验算 2 ABS
2、TRACT In this design, according to the topography, and project requirements,according to the current highway bridge design specification of prestressed concrete continuous girder bridge forward, arch bridge three schemes. structure after the bridge of various final choice of three-span prestressed c
3、oncrete continuous girder bridge design for this recommendation. This design uses Midas software for prestressed concrete continuous beam bridge structural analysis, building bridges basic model developed based on the size of the bridge, and then to Internal force on the girder dead load and live lo
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 预应力 混凝土 连续 毕业设计 计算
