毕业设计---三路输出的开关电源系统

《毕业设计---三路输出的开关电源系统》由会员分享，可在线阅读，更多相关《毕业设计---三路输出的开关电源系统（46页珍藏版）》请在毕设资料网上搜索。

1、 1 摘摘 要要 本文设计了一个三路输出的开关电源系统,首先将开关电源与线性电 源进行对比，总结了开关电源的优点,并对其当前的发展以及在发展中存 在的问题进行了描述，然后在对开关电源的整体结构进行了介绍的基础 上，对开关电源的主回路和控制回路进行设计：在主回路中整流电路采用 单相桥式、功率转换电路采用单端正激功率转换电路、采用增加副边绕组 的方法实现多路输出，其中功率转换电路（DC/DC 变换器）是开关电源 的核心部分，对此部分进行了重点设计；控制电路采用 PWM 控制，控制器 采用开关电源集成控制器 GW1524、设计了过压保护电路、电压检测电路 和电流检测电路，对各个部分的参数进行了计算并

2、进行了元器件的选型。 【关键词关键词】DC/DC 变换器、PWM 控制、整流、滤波。 2 Abstract In this paper,I designed a switch power supply system with three outputs: Compare the switch power with linear power at first , has summarized the advantage of the switch power ,have described its present development and there are natural questio

3、ns in development. On the basis of the thing that the whole structure to the switch power has made an introduction, to the main return circuit and controlling the return circuit to design of the switch power: The rectification circuit adopts the single-phase bridge type in the main return circuit, t

4、he power changes the circuit and adopts and defies the power to change the circuit , realize by increasing the winding of one pair of sides single and well that many ways are exported, it is a key part of the switch power supply that the power changes circuit (DC/DC transformer ), have designed this part especially ; The control circuit adopts PWM to control, the controller adopts the switch power integrated controller GW1524, design the circuit to measure voltage and the circuit to el mea