毕业设计--氯乙烯精馏塔设计

《毕业设计--氯乙烯精馏塔设计》由会员分享，可在线阅读，更多相关《毕业设计--氯乙烯精馏塔设计（46页珍藏版）》请在毕设资料网上搜索。

1、 I 设计说明 氯乙烯又名乙烯基氯，是一种应用于高分子化工的重要单体。 液化后的粗氯乙烯含有低沸点物 C2H2、N2、H2等，也含有高沸点物 C2H4Cl2、 C2H2Cl2、乙醛等，所以要先用低沸塔把低沸物分离出去，再用高沸塔把高沸物分 离出去。 因为低沸塔和高沸塔设备工艺计算过程类似， 因此设计选择设计选择低沸塔。 氯乙烯精馏塔设计包括:低沸塔物料恒算，塔板数计算和确定，塔的工艺条 件和物性计算，精馏和提馏气液负荷计算，塔和塔板计算，流体力学校核，塔板 负荷性能计算，塔及其附属设备的选型，最终完成设备的确定。其中计算的低沸 塔塔高 13.765 米，塔板数为 12，其中精馏段为 7 块，提

2、馏段为 5 块，塔径为 0.9 米， 壁厚 7mm，塔板采用浮阀塔。 本设计绘制了相应的工艺流程图、物料流程图和低沸塔装配图。 关键词：氯乙烯，低沸塔，工艺流程，设计计算 II Design description Vinyl chloride, also known as vinyl chloride, was applied to the polymer chemical monomer. Containing a low boiling point material to the crude vinyl chloride in the liquefaction of C2H2, N2 H

3、2, etc., also contained high boiling point material the C2H4Cl2, C2H2Cl2, acetaldehyde, the first with a low boiling tower low boiling separate the then high boiling tower high boiling separate. Design options for the design process calculation of the low boiling towers and high-boiling tower equipm

4、ent was similar to select the low boiling tower. Vinyl chloride distillation column design included: the low-boiling tower material constant calculation, the plate number and determined the tower process conditions and properties calculation, distillation and stripping gas and liquid load calculation, tower and tray calculations, fluid mechanics check plate load performance calculation, the tower and its ancillary equipment selection, the final completion of the equipment. The calculation of lo