谐波毕业设计英文文献翻译

《谐波毕业设计英文文献翻译》由会员分享，可在线阅读，更多相关《谐波毕业设计英文文献翻译（11页珍藏版）》请在毕设资料网上搜索。

1、 Harmonics Service reliability and quality of power have become growing concerns for many facility managers, especially with the increasing sensitivity of electronic equipment and automated controls. There are several types of voltage fluctuations that can cause problems, including surges and spikes

2、, sags, harmonic distortion, and momentary disruptions. Harmonics can cause sensitive equipment to malfunction and other problems, including overheating of transformers and wiring, nuisance breaker trips, and reduced power factor. What Are Harmonics? Harmonics are voltage and current frequencies rid

3、ing on top of the normal sinusoidal voltage and current waveforms. Usually these harmonic frequencies are in multiples of the fundamental frequency, which is 60 hertz (Hz) in the US and Canada. The most common source of harmonic distortion is electronic equipment using switch-mode power supplies, su

4、ch as computers, adjustable-speed drives, and high-efficiency electronic light ballasts. Harmonics are created by these switching loads (also called “nonlinear loads, because current does not vary smoothly with voltage as it does with simple resistive and reactive loads): Each time the current is switched on and off, a current pulse is created. The resulting pulsed waveform is made up of a spectrum of harmonic frequencies, including the 60 Hz fundamental and multiples of it. This voltage dis