土木专业毕业设计--建筑结构设计

《土木专业毕业设计--建筑结构设计》由会员分享，可在线阅读，更多相关《土木专业毕业设计--建筑结构设计（78页珍藏版）》请在毕设资料网上搜索。

1、商业银行商业银行*支行建筑结构设计支行建筑结构设计 摘摘 要要 本次为八层框架结构，建筑总高度 28.6m，建筑面积约 8000m 2。通过对该幢建筑的建筑、 结构设计，熟悉了单体建筑的准备、设计、施工全过程，绘制了建筑、结构设计图纸，我在计 算书中详细介绍了此办公楼的建筑、 结构设计的全过程。 设计分为建筑设计和结构设计两部分。 一、建筑设计 在满足设计任务书提出的功能要求前提下，进行平面、立面及剖面设计，最后绘出建筑图。 二、结构设计 结构设计步骤分为七个部分： 1、确定构件的几何尺寸，选择计算框架； 2、计算水平荷载（地震、风载）作用下的梁柱内力； 3、计算竖向荷载（恒载、活载）作用下的

2、梁柱内力； 4、内力调幅 5、内力组合、调整与换算 6、根据内力组合中几种最不利的组合情况，进行柱、梁、楼梯、板、基础的配筋计算； 7、根据结构计算，绘制施工图。 关键词关键词：框架结构，建筑设计，荷载，结构设计，抗震设计 II SOUTHERN COMMERCIAL BANK BRANCH BUILDING DESIGN OF BUILDING STRUCTURE ABSTRACT The framework for the eight-storey structure, construction of a high degree of 28.6 m, building an area of

3、 about 6802.9 m2. Through the building blocks of buildings, structural design, construction of single familiar with the preparation, design and construction process, rendering the construction, structural design drawings, in the calculation of the book I described in detail the construction of offic

4、e buildings, structural design The entire process. Design is divided into architectural design and structural design in two parts. First, architectural design Designed to meet the mandate of the functional requirements of the premise, a plane, elevation and profile design, the final building plans d

5、rawn. Second, structural design Structure is divided into seven parts: 1 to determine the geometry component, select calculation framework; 2, the calculation of the level of load (earthquakes, wind load) under the internal forces and beams; 3, calculated vertical load (dead load and live load) unde

6、r the internal forces and beams; 4, internal forces AM 5, the combination of internal forces, restructuring and conversion 6, according to several internal forces in the portfolio composition of the most disadvantaged circumstances, columns, beams and staircases, panels, calculated based on the reinforcement; 7, according to the structure, drawing construction plans. KEY WORDS: Frame structure， Architectural design， Loads， Construction design，Anti-seismic design III 目目 录录 前 言 .1