毕业设计---全自动存包柜的设计

《毕业设计---全自动存包柜的设计》由会员分享，可在线阅读，更多相关《毕业设计---全自动存包柜的设计（44页珍藏版）》请在毕设资料网上搜索。

1、 I 全自动存包柜的设计全自动存包柜的设计 摘摘 要要 本文详细介绍了国内自动存包控制系统的发展现状，发展中所面临的问题。并详 细介绍了本系统采用的单片机做控制器，可以同时管理 N 个存包柜。柜门锁由电磁阀 控制，当顾客需要存包的时候，可以自行到存包柜前按“开门”键，单片机接收到一 脉冲信号，并通过系统 I/O 口发出相应的信号，控制锁柜门的电磁阀将一空箱打开， 顾客即可存包，并将柜门关上。当顾客需要取包时，要将只要将条码放置到条形码阅 读器前方，条形码阅读器采集到条码信息输出相应的高低电平信号传给单片机，系统 比较密码一致后，发出开箱信号至电磁阀是柜门打开，顾客即可将包取出。 关键词：自动存

2、包 单片机 光电传感器 条形码阅读器 II Design of Automatic Package of Counter Abstract This paper describes the control system of the domestic auto-save package development status of the problems faceing the development. And details of the system microcontroller to do with the controller, can manage a package of cou

3、nter N. Controlled by a solenoid valve cabinet locks, when customers need to save the package, they can keep their own bag to the counter before the press the “open“ button, the microcontroller receives a pulse signal, and the system I / O port to issue the appropriate signal, control lock door of t

4、he solenoid valve will be an empty box is opened, the customer can deposit bags, and cabinet door. When the customer needs to take when the package is to simply place the barcode in front of bar code readers, bar code readers bar code information collected by the high-low output signals to the appropriate microcontroller, the password system is relatively consistent, the issue out of the box signal to the solenoid valve is the door open, the customer can remove the package. Keywords: Autom