螺旋输送机 毕业设计（含外文翻译）

《螺旋输送机 毕业设计（含外文翻译）》由会员分享，可在线阅读，更多相关《螺旋输送机 毕业设计（含外文翻译）（54页珍藏版）》请在毕设资料网上搜索。

1、 I 螺旋输送机 摘 要 LS型螺旋输送机是采用国际标准产品,等效采用ISO1050-75标准,设计制造符 合 ZBJ1005.1-2-88 专业标准。LS 型螺旋输送机的应用范围：LS 螺旋输送机被广 泛运用于各种行业，如建材、化工、煤矿碳、粮食等行业.它多适用于水平或倾斜 输送粉状、粒状和小块状物料，如煤矿、面粉、水泥、化肥、沙子等，输送物料 温度一般为2080，并且当输送机倾斜输送时倾斜角度一般低于 15。 这次设计，我通过查阅了相关书籍资料，了解其结构后确定了其驱动方式为 单端驱动。通过假定输送物料为煤粉进行相关数据的分析确定了输送机相关部分 的尺寸，进而画出图纸，完成本次设计。 LS

2、 型螺旋输送机由驱动装置、螺旋体、机槽、机架和轴承组成。驱动装置包 括电机和减速器。螺旋体由轴和叶片组成。机槽由几节连接而成。轴承含有 3 种： 头部轴承、中间轴承和尾部轴承。 关键字：螺旋输送机，螺旋体，物料 II SCREW CONVEYOR ABSTRACT The LS screw conveyer uses the international standard product, equivalent uses the ISO1050-75 standard, the design manufacture conforms to the ZBJ1005.1-2-88 specializ

3、ed standard. LS screw conveyers application scope: LS screw conveyer is widely used in each Industry sector, such as building materials, chemical industry, coal, and grain and food profession. It is usually used to level or tilt transport powdery, granular and small massive material, like coal, flou

4、r, cement, fertilizer, and sand. The material temperature is usually from -20 to 80, and when the spiral is tilt transporting, its angle is always little than 15. This design, through searching related books and information; I know its structure and define its drive style-single-ended drive. Through assuming that the material is pulverized coal and analyzing its date, I define its size which related to the analysis, and then, draw the blueprint and finish this design. The LS screw co