家居智能安保系统设计毕业设计
《家居智能安保系统设计毕业设计》由会员分享,可在线阅读,更多相关《家居智能安保系统设计毕业设计(46页珍藏版)》请在毕设资料网上搜索。
1、 家居智能安保系统设计家居智能安保系统设计 家居智能安保系统设计 摘要摘要 本文利用单片机结合传感器技术而开发设计了这一煤气泄漏自动报 警系统。本设计将采用 MQ_5 传感器,再将信号通过 ADC0809 直接转 换成数字信号送给单片机, 电路简单, 成本低; 实现声光报警。 选用 MQ-5 型半导体可燃气体敏感元件烟雾传感器实现烟雾的检测, 具有灵敏度高、 响应快、抗干扰能力强等优点,而且价格低廉,使用寿命长。采用 SMC1602A 液晶显示模块可以直观的显示实时温度和气体浓度。选用 AT89S52 单片机对所采集的数据进行处理。该系统结构简单、性能稳定、 使用方便、价格低廉,具有一定的实用
2、价值。 关键字:关键字:煤气监控系统 单片机 MQ-5 家居智能安保系统设计 Abstract Based on single chip microcomputer combined with the sensor technology and development and design the gas leakage alarm system automatically. MQ-5 sensor is adopted in this design, then send signal directly by ADC0809 converts digital signals to single
3、 chip and circuit is simple, the cost is low; Implement sound and light alarm. Use MQ to 5 type semiconductor gas sensitive element smoke sensor realize smoke detection, high sensitivity, fast response, and the advantages of strong anti-jamming capability, and low cost, long service life. Using SMC1
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 家居 智能 安保 系统 设计 毕业设计
