A1O脱氮工艺炼油污水处理毕业设计

《A1O脱氮工艺炼油污水处理毕业设计》由会员分享，可在线阅读，更多相关《A1O脱氮工艺炼油污水处理毕业设计（64页珍藏版）》请在毕设资料网上搜索。

1、 I 摘 要 炼油污水中通常含有大量的油、BOD5、COD、NH4-N、酚及其它杂质等。 为保证出水达到排放标准，必须对其进行处理。 本设计采用 A1/O 脱氮工艺对隔油后的炼油污水进行生化处理，即采用的是 前置反硝化生物脱氮工艺。设计中主要处理设施有缺氧池、好氧池、二沉池、混 凝反应池、 混凝沉淀池、 监测池等。 A1/O 脱氮工艺主要包括生物除碳、 好氧硝化、 缺氧生化、混凝沉淀四个部分。在反应工序中，通过硝化菌的作用、将氨氮转化 为亚硝态氮、硝态氮，再通过反硝化作用将硝态氮转化为氮气，从而达到从废水 中脱氮的目的。二沉池出水进入混凝反应池，通过向混凝反应池中投加无机复合 絮凝剂，使污水中

2、的杂质和悬浮物沉降，进一步提高出水水质。 本工艺系统流程简单，不需外加碳源，基建费用与运行费用低，处理效果好， 易于管理。 关键词关键词：炼油污水；硝化；反硝化；混凝 II Abstract The oil-refining sewage usually includes a large amount of oil, BOD5, COD, NH4-N, phenylic acid and other impurities, etc. In order to achieve the effluent standard, the oil-refining sewage must be dispos

3、ed. The A1/O denitrification craft is adopted to carry out biochemical treatment for refinery sewage after oil removal, i.e., the pre-denitrification biotreatment process. The main processing establishments include anoxic basin, aerobic basin, secondary sedimentation basin, coagulation basin, coagul

4、ative precipitation tank, monitoring basin and so on. And the A1/O denitrification craft is made of four sections of biological decarbonization, aerobic nitration, anoxic biochemistry, and coagulative precipitation. In reaction procedure, the ammonia nitrogen is transformed into the nitrite nitrogen and the nitrate by nitrification, and then the nitrate nitrogen is transformed into nitrogen by denitrification, thereby the aim that the nitrogen is removed away from sewage comes true. The yielding