搬运机械手PLC控制系统设计毕业设计

《搬运机械手PLC控制系统设计毕业设计》由会员分享，可在线阅读，更多相关《搬运机械手PLC控制系统设计毕业设计（70页珍藏版）》请在毕设资料网上搜索。

1、搬运机械手 PLC 控制系统设计 摘 要 随着工业自动化的普及和发展，控制器的需求量逐年增大，搬运机械 手的应用也逐渐普及，主要在汽车，电子，机械加工、食品、医药等 领域的生产流水线或货物装卸调运, 可以更好地节约能源和提高运 输设备或产品的效率， 以降低其他搬运方式的限制和不足，满足现代 经济发展的要求。 本机械手的机械结构主要包括由两个电磁阀控制的液压钢来实现机 械手的上升下降运动及夹紧工件的动作， 两个转速不同的电动机分别 通过两线圈控制电动机的正反转， 从而实现小车的快进、 慢进、 快退、 慢退的运动运动；其动作转换靠设置在各个不同部位的行程开关 (SQ1-SQ9)产生的通断信号传输到

2、 PLC 控制器，通过 PLC 内部程序 输出不同的信号， 从而驱动外部线圈来控制电动机或电磁阀产生不同 的动作，可实现机械手的精确定位；其动作过程包括：下降、夹紧、 上升、慢进、快进、慢进、延时、下降、放松、上升、慢退、快退、 慢退；其操作方式包括：回原位、手动、单步、单周期、连续；来满 足生产中的各种操作要求。 关键词：搬运机械手，可编程控制器（PLC），液压，电磁阀 ABSTRACT With the popularity of industrial automation and development, the demand for year-on-year increase of c

3、ontroller, handling the application of robot gradually popularity, mainly in the automotive, electronic, mechanical processing, food, medicine and other areas of the production line or cargo transport, we can be more good to save energy and improve the transport efficiency of equipment or products,

4、to reduce restrictions on other modes of transportation and inadequate to meet the requirements of modern economic development. The manipulator mechanical structure includes two solenoid valves controlled by hydraulic manipulator steel to achieve the increased decline in sports and workpiece clampin

5、g action, the two different motor speed through the two motor coils positive control in order to achieve car of the fast-forward, slow forward, fast rewind, slow movement back movement; conversion by setting its action in various different parts of the trip switch (SQ1 - SQ9) generated on-off signal

6、 transmission to the PLC controller, through the PLC internal different output signal, which drives the external coil to control the motor or solenoid valves have a different action, the robot can achieve precise positioning; their course of action include: decline in clamping increased, slow forward, fast forward, slow progress, the extension of , the drop in, relax, rise, slow back, rewind, slow back; its operation, including: Back in situ, manual, single-step, single cycle, continuous; t