【精品文档】关于LabVIEW软件编程有关的外文文献翻译成品：利用LabVIEW软件开发新的数据采集软件（中英文双语对照）

《【精品文档】关于LabVIEW软件编程有关的外文文献翻译成品：利用LabVIEW软件开发新的数据采集软件（中英文双语对照）》由会员分享，可在线阅读，更多相关《【精品文档】关于LabVIEW软件编程有关的外文文献翻译成品：利用LabVIEW软件开发新的数据采集软件（中英文双语对照）（15页珍藏版）》请在毕设资料网上搜索。

1、此文档是毕业设计外文翻译成品（ 含英文原文+中文翻译） ，无需调整复杂的格 式！下载之后直接可用，方便快捷！本文价格不贵,也就几十块钱！一辈子也就 一次的事！ 外文标题：USING LabVIEW SOFTWARE FOR DEVELOPMENT OF NEW DATA ACQUISITION SOFTWARE 外文作者：Marko Reibenschuh, Franc Cus, Uros Zuprel 文献出处: machine design, Vol.4(2019) No.3, ISSN 1821-1259 pp. 157-160 (如觉得 年份太老，可改为近 2 年，毕竟很多毕业生都这样

2、做) 英文 2531 单词，15430 字符(字符就是印刷符)，中文 3900 汉字。 USING LabVIEW SOFTWARE FOR DEVELOPMENT OF NEW DATA ACQUISITION SOFTWARE Abstract: LabVIEW enables programing and development of different interfaces for monitoring. Because of worldwide increasing demands for condition monitoring and demands to increase pr

3、oductivity, a new user interface for data acquisition is developed and applied to gather data and information during cutting. Other possibilities for implementing the method into production process are also researched. To monitor a high speed process, the use of high speed camera is inevitable. This

4、 paper presents preliminary development, tests and result. Key words: Monitoring, Milling, Data Acquisition, LabVIEW 1.INTRODUCTION Programs developed for monitoring are no longer written in whole by the developer. Programs as C, C#, C+, Lisp and many others are complex to write and correct. LabVIEW has the advantage that many of the coding is already grouped into blocks, which already have a certain function. In recent years there has been a minor setback in development of new acquisit