加载器毕业设计

《加载器毕业设计》由会员分享，可在线阅读，更多相关《加载器毕业设计（26页珍藏版）》请在毕设资料网上搜索。

1、摘摘 要要 加载器是齿轮箱在以封闭试验台形式进行试验的常用加载工具， 本文首先介绍了加 载器的特点、分类以、国内外发展的现状以及所存在的缺点等等。通过对现有加载器的 分析研究和对设计要求的分析，同时为了有效避免现有的加载器存在的各种不足，对加 载装置进行了整体结构设计，提供一种比较理想的加载装置，研究并设计出一种新型转 矩可调式内斜齿液压加载装置，并对加载装置各关键部件进行了受力分析和强度校核， 该加载装置通过采用一对基本参数相同， 旋向相反的内斜齿圆柱齿轮使得加载机构的结 构紧凑，能够双向加载；采用合理的结构设计提高了传动零件的支撑刚度，并通过设置 多处密封圈，很好地改善了液压加载装置的密封

2、问题，通过受力分析得到齿轮所受的轴 向力大小，能够实现加载可靠、精度高、载荷便于测量，能够在长期运转中保持加载力 矩稳定不变；能够实现空载起动，并能在运转中改变加载力矩的大小，便于进行模拟实 验；整体方案结构简单，便于制造、装配、调整和操作。 关键关键词词：加载装置 结构设计 强度校核 ABSTRACT The loader is a common load tool which is used in gearbox. Gearbox is tested in the form of closed test-bed. This paper firstly introduces the char

3、acteristics of the loader, classification, the present situation of the development of both at home and abroad, and the drawbacks of the loader and so on. Through the study of existing loader and analysis of the design requirements, at the same time, in order to effectively avoid the existing these

4、existing shortages of the loading devices, designing the overall structure, provide an ideal loading device, research and designs a new type torque in adjustable helical hydraulic loading device, studying the stress analysis and strength check of each key components of loading devices, the loading device uses a pair of helical gear with the same basic parameters and the opposite spin which makes the structure compacted, can be two-way loading; The use of reasonable structure increase the stiffn