毕业设计--基于ProE的插排外壳设计

《毕业设计--基于ProE的插排外壳设计》由会员分享，可在线阅读，更多相关《毕业设计--基于ProE的插排外壳设计（39页珍藏版）》请在毕设资料网上搜索。

1、基于 Pro/E 的插排外壳设计 摘摘 要要：论文探讨了基于 Pro/E 对插排的外壳进行设计。插排是日常生活中的不可缺 少的用具，它的主要结构是上下两个薄体匝壳，上壳体表面有相适应的插孔， 下壳通过螺钉螺孔与上壳装配而成。Pro/E 具有强大的 3D 曲面造型功能，通 过 Pro/E 的曲面造型模块以及二维平面制图设计出插排上下外壳， 而其插孔与 螺钉螺孔则通过软件的实体拉伸、去除材料、曲面编辑等基础特征的创建、 工程特征的创建来完成，最后通过零件的装配特征将上下壳体组装成插排。 这是一次应用三维设计软件进行实体操作及应用的实例，通过此次的设计可 以为将来更好的应用于工业工程或设计其它产品而

2、打下坚实的基础。 关键字关键字：Pro/E；插排；3D 造型 Design of the shell of the socket on Pro/E Abstract：This paper mainly describes the design of the shell of socket based on Pro/E . The socket is indispensable in daily life utensils, its main structure is a body turns up and down two thin shell, the middle and upper sh

3、ell have to adapt to the jack, the lower shell with screws and screw assembly from the shell. Pro / E has a powerful 3D surface modeling capabilities, through the Pro / E and the two-dimensional surface modeling module design drawing Inserted row upper and lower case, and its screw jack screw throug

4、h the software entity stretch, material removal, surface editing features to create a foundation to create the project features to complete the final assembly features through the upper and lower parts of the housing assembly is inserted into the row. This is the first application of three-dimensional design software for the operation and application examples of entities through the design of the future can be better used in industrial engineering or designing other products and lay a solid foun