电磁加热炉课程设计报告

《电磁加热炉课程设计报告》由会员分享，可在线阅读，更多相关《电磁加热炉课程设计报告（24页珍藏版）》请在毕设资料网上搜索。

1、 摘 要 供暖问题使人们尤为关注的问题，尤其在中国的北方，显得更加重要。本次 设计主要研究由单片机和电磁电路构成的电磁加热装置，实现对水温的控制。由 于我国北方农村大量使用土暖气，不仅污染环境而且煤的利用率低等问题，浴池 中也存在煤的利用率低的问题和锅炉离不开人、而增加成本的问题。使用该装置 就可以解决上述问题，符合国家号召的“低碳生活” 。该加热装置与普通的锅炉 加热设备相比，有廉价、加热速度快、节能环保的特点。用单片机控制加热装置 可实现温度可以自设定、开机时间自设定。实现了室内温度控制的自动化。与其 他装置相比，单片机控制作为控制器可以是装置更加廉价而且智能。 关键词 供暖 单片机 电磁

2、加热装置 智能 Abstract The issues of the heating is concerned, especially in the north of China, appear more important. This design research by single-chip microcomputer and electromagnetic circuit consists of the electromagnetic heating device, to realize to control the temperature of water. Because most

3、 of our countries in the north use TuNuanQis, not only pollute the environment and reduce the utilization of coal , but also are existed in the boilers inseparable from the people and increase the cost. Use this device can solve the problems above, according with a country called for “the low carbon

4、 life“. Compared with ordinary boiler heating equipments , this heating device is cheaper, more heating speed, the characteristics of energy saving and environmental protection. With single-chip microcomputer control heating device can realize temperature can be set, boot time since the setting. Realizing to control the temperature in automation indoor. Compared with other devices, SCM control as a controller can is the device cheaper and intelligence. Key words : heating single-chip micr