毕业设计----顶梁柔性液压支架

《毕业设计----顶梁柔性液压支架》由会员分享，可在线阅读，更多相关《毕业设计----顶梁柔性液压支架（54页珍藏版）》请在毕设资料网上搜索。

1、毕业设计 - I - 摘要摘要 本次设计的内容是分体顶梁柔性液压支架，我在本次设计中主要负责该支架的液压系 统部分。此次任务包括立柱、伸缩油缸、销轴的的设计与计算，立柱由液压油缸组成；伸 缩油缸在顶梁部分，销轴主要用于油缸与耳板之间的连接。 这种支架最大的特点是采用垂直柔性导杆结构来代替传统的四连杆结构；采用分体式 顶梁代替整体顶梁。这种支架因结构简单、重量轻、造价低、节省空间，大大减轻了支架 的整体重量，梁采用伸缩式的，支撑过程中能与地板接触，不仅起到一定的掩护作用，而 且还能起到一定的支撑作用，使支架更稳定。 关键词：液压支架；分体顶梁；柔性；液压油缸； 毕业设计 - II - Abstr

2、act The design is flexible beam at the top of the hydraulic support, I am in this design is mainly responsible for the part of the hydraulic system of the stent. The taskincluding the column, telescopic cylinders, the pin design and calculation, to play a supportive role column, composed by the hydr

3、aulic cylinder; telescopic part of the fuel tank in the roof beams, pin mainly used in the fuel tank and the connection between the ear plate. Column composed of the hydraulic cylinder; telescopic part of the fuel tank in the roof beams, pin mainly used in the fuel tank and the connection between th

4、e ear plate. The greatest feature of this stent is flexible vertical guide structure to replace the traditional four-bar linkage structure; the use of split-type roof top beam instead of the whole beam. Stent because of this simple structure, light weight, low cost and save space, reduce the overall weight of the stent, the use of telescopic beam, and support the process of contact with the floor, cover not only play a role, but also play a supporting role, so that a more stable support. Key wo