土木工程毕业设计计算书 (2)

《土木工程毕业设计计算书 (2)》由会员分享，可在线阅读，更多相关《土木工程毕业设计计算书 (2)（64页珍藏版）》请在毕设资料网上搜索。

1、1 本科毕业设计（论文）本科毕业设计（论文） 题题 目目 系系 别别 建建 筑筑 系系 专业班级专业班级 姓姓 名名 学学 号号 指导老师指导老师 系主任系主任 20132013 年年 4 4 月月 20 20 日日 111111 2 摘 要 本工程为安徽省芜湖市某敬老院结构设计， 该楼为 5 层钢筋混凝土框架结构，建 筑占地面积为 1097m2，总建筑面积为 5201m2，建筑高度为 18.5m，考虑抗震算计。为 手算方便，整个结构采用一榀框架结构进行计算。本次计算书是对第6 轴横向框架 的结构设计，内容主要包括构件截面选型、荷载统计、内力计算组合及构件配筋计算 等。此外，还进行了结构方案中

2、的室内楼梯设计，并计算了梯段板、梯梁、梯柱等构 件的内力和配筋及施工图绘制。最后，对桩基础还进行了计算。 本设计书包括如下部分： 1项目概况； 2框架结构布置及计算简图； 3荷载计算； 4内力计算； 5内力组合； 6截面设计； 7. 楼梯设计； 8. 楼面板计算； 9基础设计。 关键词：钢筋混凝土；框架结构；内力计算 3 Abstract This project is a structure design of a administration multiple building of a chemical plant which is located in Hangzhou, Zhe ji

3、ang province. The five-story building is of a reinforced concrete frame structure and with a total construction area of 1097m 2,the whole area of this building is 5201m 2 as well, while the height of the building is18.5m(without regard to seismic calculations).In order to calculate more easier, the

4、entire structure use a typical frame structure design as a method to calculate. The design for the six of main horizontal axis of the structural design of the framework. This paper includes section selection, load statistics, analysis and internal force components, such as reinforcement calculation.

5、 In addition, the structure of the program carried out in the design of the interior staircase and the completion of a platform board, bench plates, beams and other platform components, and reinforcement of the internal force calculation and mapping work .Finally, the pile foundation is also calcula

6、ted. This paper has the following chapters: 1. General situation of the project 2. The lay out of the frame structure and numeration sketch 3. The loads calculation; 4. The internal force calculation; 5.The internal force combinations; 6. The section design; 7 The staircases design; 8 The floor panels calculation ; 9. The foundation design. KeywordsKeywords：reinforced concrete；framework；intern