液压式抽油机的设计毕业论文

《液压式抽油机的设计毕业论文》由会员分享，可在线阅读，更多相关《液压式抽油机的设计毕业论文（42页珍藏版）》请在毕设资料网上搜索。

1、 液压液压式式抽油机的设计抽油机的设计 摘要：摘要：本文根据液压抽油机的基本参数和机构性能特点，以常规游梁式抽油机为基 础模型，对其进行技术性改进，而得到具有新型节能特点的液压式式抽油机。该机具 有无极调节冲程长度、冲次，悬点震动载荷小，控制灵活、方便等优点，可以适应不 同的油井状态，同时在最大限度内保持了常规游梁式抽油机结构简单、操作、维修方 便的优势，适合在各种工况的原油开采，是一种综合性能比较好的液压抽油机。文章 在液压式抽油机基本理论的基础上，做了以下计算：液压式抽油机驴头悬点载荷的计 算、液压系统原理图的设计、液压缸的设计和电动机的功率计算等。最后介绍的是各 零部件设计的尺寸计算与校

2、核，液压式抽油机通过液压系统驱动抽油杆上下往复运 动；平衡系统主要用于控制和调节工作行程换向和抽油杆柱运动的平衡，是电机的负 载均匀，达到节省能源的目的。 ，并且有利于改善构件的受力状况，减少抽油机事故 的发生，从而提高抽油机的综合效益。对平衡的配置进行分析和优化设计，满足所要 求的工况需要。 关键词：关键词：液压抽油机； 液压系统； 液压缸 The design of hydraulic pumping unit Abstract: According to the basic parameters of hydraulic pumping units and agencies of the

3、 performance characteristics of a conventional beam pumping unit for the base model, its technical improvements, and get a new energy-saving features of the hydraulic pumping unit. The machine has limitless adjustment stroke length, stroke, shock suspension point load of small, flexible control and

4、easy, well you can adapt to different states, while the maximum extent possible to maintain the conventional beam pumping unit of simple structure, operation, the advantages of easy maintenance, suitable for a variety of working conditions in crude oil production, is a relatively good overall perfor

5、mance hydraulic pumping unit. Article in the hydraulic pumping unit based on the basic theory, do the following calculation: the first ass hydraulic pumping rod load calculations, schematic design of the hydraulic system, hydraulic cylinder design and motor power calculation. Finally, the design is

6、the size of the parts calculation and check, hydraulic pumping unit driven by the hydraulic system of the upper and lower reciprocating rod; balance system is mainly used to control and adjust the work schedule for movement to and sucker rod balance the electrical load evenly, to save energy purposes. And components will help to improve the situation by force, to reduce the occurrence of pumping units, thereby improving the overall efficiency of pumping units. The configuration of the balanced