20m简支t梁桥毕业设计
《20m简支t梁桥毕业设计》由会员分享,可在线阅读,更多相关《20m简支t梁桥毕业设计(94页珍藏版)》请在毕设资料网上搜索。
1、 本科毕业设计本科毕业设计 题题 目目 宿迁市宿迁市 330 省道溧河洼大桥设计省道溧河洼大桥设计 I 摘 要 本设计为宿迁市330省道溧河洼大桥设计, 桥梁全长为60m桥面净宽9+21.5m, 设计荷载为:公路级。本桥采用了预应力混凝土 T 形梁桥,第一部分主要内容主 要是通过方案的比选确定本次设计的桥型。第二部分是上部结构设计,主要包括结构 尺寸的拟定、 恒载和活载内力计算、 根据承载力配筋并进行截面的承载力和应力验算、 张拉预应力钢筋和计算预应力钢筋的各种应力损失、 验算局部承压和梁的挠度变形计 算,横隔梁和行车道板的承载力计算。第三部分是下部结构设计,主要包括双柱式桥 墩和钻孔灌注桩的
2、设计资料以及尺寸拟定、盖梁和桥墩柱计算,最后进行了钻孔灌注 桩的计算。 关键词关键词:预应力,简支 T 形梁,钢束,桥墩柱 II ABSTRACT The design of the Suqian 330 provincial road Lihewa bridge design, the brid ge length of 60m, bridge width: 9+21.5m, the design load: Highway- level. Th is bridge, designed of prestressed concrete T beam bridge, the first part
3、 of the mai n content is mainly determined by comparison of the design of the bridge. The sec ond part is the design of super structure,mainly includes the structure size of dead load and live load, internal force calculation, according to the bearing capacity of reinforcement and bearing capacity o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 20 毕业设计
