倒立摆外文翻译

《倒立摆外文翻译》由会员分享，可在线阅读，更多相关《倒立摆外文翻译（19页珍藏版）》请在毕设资料网上搜索。

1、 电子与信息工程学院 本科毕业 设计 外 文 文 献 翻 译 论文题目 直线式倒立摆控制系统 学生姓名 包雷 专 业 电气工程及其自动化 指导教师 李 东 京 2011 年 11 月 The inverted pendulum Key words: inverted pendulum, modeling, PID controllers, Fuzzy controllers, state space controllers What is an Inverted Pendulum? Remember when you were a child and you tried to balance

2、a broom-stick or baseball bat on your index finger or the palm of your hand? You had to constantly adjust the position of your hand to keep the object upright. An Inverted Pendulum does basically t he same thing. However, it is limited in that it only moves in one dimension, while your hand coul d m

3、ove up, down, sideways, etc. Check out the video provided to see exactly how the Inverted Pe ndulum works. 倒立摆是什么？还记得当你是个孩子时你曾用你的食指或者掌心设法去平 衡一把扫帚柄或者棒球棍吗？你必须不断地调整你 的手的位置以保持对象的垂 直。一个倒立摆在本质上就是做相同的事情。然而，它会受限制因为它只能在 一 定范围内移动，虽然你的手可以上升、下降、斜向一边等等。检查录象提供 的画面来观察倒立摆是如何确切 地工作的。 An inverted pendulum is a physic

4、al device consisting in a cylindrical bar (usually of aluminum) free to oscillate around a fixed pivot. The pivot is mounted on a carriage, which in its turn can mo ve on a horizontal direction. The carriage is driven by a motor, which can exert on it a variable for ce. The bar would naturally tend

5、to fall down from the top vertical position,which is a position of unsteady equilibrium. 一个倒立摆是个物理设备它包括一个圆柱体的棒子（通常是铝的）可以在一 个支点周围振荡。这个支点是安在一个车架上，它的转动方向是水平的偏转。小 车是由一个马达控制的，它可以运用于一个变力。棒子会有自然的趋势从最高的 竖直位置下落，那是一个不稳定的平衡位置。 The goal of the experiment is to stabilize the pendulum (bar) on the top vertical po

6、sition. This is possible by exerting on the carriage through the motor a force which tends to contrast the free pe ndulum dynamics. The correct force has to be calculated measuring the instant values of the horiz ontal position and the pendulum angle (obtained e.g. through two potentiometers). 实验的目标

7、是使摆（棒子）稳定在最高的竖直位置。这是有可能的只要运用 通过马达的小车一个力该力可以与“自由”摆的动力学抵消。 这个正确的力必须 通过计算测量水平偏转的瞬时值和摆的角度（获得两个电位计） 。 The system pendulum+cart+motor can be modeled as a linear system if all the parameters are k nown (masses, lengths, etc.), in order to find a controller to stabilize it. If not all the parameters ar e known, one can however try to reconstruct the