频率计毕业设计
《频率计毕业设计》由会员分享,可在线阅读,更多相关《频率计毕业设计(41页珍藏版)》请在毕设资料网上搜索。
1、 I 摘 要 频率计作为一件很普遍的的电子器件,在很多领域都能够用到,目前大部分频率计的 测频范围都很窄,有时不能满足所要测的频率。因此,本文提出宽频带频率计的的设计方 案,以单片机 AT89C52 为控制核心,实现测量多种波形的频率值。 采用在高频段直接测频法,在低频段测周期法的设计思路;硬件部分由放大电路、波 形变换和整形电路、闸门时基控制电路、分频电路、单片机和数据显示电路组成;软件部 分由信号频率测量模块、周期测量模块、定时器中断服务模块、数据显示模块等功能模块 实现。应用单片机的控制功能和数学运算能力,实现计数功能和频率、周期的换算。设计 的频率计测量范围能够达到 2HZ1MHZ,满
2、足所要求的频率范围,测量精度较高,平均相 对误差低。 关键词:AT89C52;宽频带;频率计 ABSTRACT As a very common electronic components,The frequency meter is used in many areas. At present, most of the frequency meter measuring frequency range is very narrow, and sometimes it cant satisfy the frequency of the measure. Therefore, this pape
3、r puts forward the frequency meter wide band to realize the value of measurement frequency wave. This design is going to make the AT89C52 single chip microcomputer as control core. The high frequency band in direct frequency measurement method, at low frequency measurement cycle method of design thi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 频率计 毕业设计
