毕业设计---音箱放大器的设计
《毕业设计---音箱放大器的设计》由会员分享,可在线阅读,更多相关《毕业设计---音箱放大器的设计(26页珍藏版)》请在毕设资料网上搜索。
1、题题 目目: 音响放大器的设计 摘摘 要要 本文介绍了音响的构成、功能、及工作原理,它由 TDA2822M 芯片所组成的 功放电路,本身具有电源电压范围宽,静态功耗小,可单电源使用,价格低廉等 优点。而 TDA2822M 是一款输出功率适中,最大功率到达 3W 左右, 静态电流小, 负载能力强,动态电流大既可带动 4-8 的扬声器,电路简洁,制作方便、性能 可靠的功放。本设计的功能是将输入音频信号进行放大,是一种可普遍用于家庭 音响系统、立体声唱机等电子系统中,便于携带,适用性强。 关键词:TDA2822M BTL Abstract This article describes the sou
2、nd of the composition, function, and principle, it is formed by the TDA2822M chip power amplifier circuit, the static power consumption can be a single power use and low cost advantages. The TDA2822M a high output power, maximum power reaches 3W or so, the static current, load capacity, dynamic curr
3、ent can drive large 4-8 speaker, circuit simplicity, making convenient and reliable high-fidelity power amplifier, and an internal protection circuit. This design feature is the input audio signal amplification,Is generally available for home audio systems, stereo player and other electronic system,
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 毕业设计 音箱 放大器 设计
