毕业设计--片上系统的UART接口控制器IP设计
《毕业设计--片上系统的UART接口控制器IP设计》由会员分享,可在线阅读,更多相关《毕业设计--片上系统的UART接口控制器IP设计(58页珍藏版)》请在毕设资料网上搜索。
1、 毕 业 设 计(论文) 题目: 片上系统的 UART 接口控制器 IP 设计 姓名 学 号 所在单位 指导教师 完成日期 片上系统的 UART 接口控制器 IP 设计 摘摘 要要 当代在通信和控制系统中,常使用 UART (通用异步收发器)实 现系统辅助信息的传输。 UART 虽然通信速度不快, 但是它具有电 路简单,成本低,性能可靠,特别适合远距离数据传输等优点。因 此,在许多对通信速度要求不高的场合,异步串行口还发挥着很重 要的作用,被广泛的使用。而如今市场上的 UART 功能复杂,在应 用只使用到它的几个基本功能,因而造成资源浪费,为此我们需要 对 UART 的功能进行精简,方便使用,
2、降低 CPU 的工作负担,提 高了系统性能。 关键词关键词: UART 片上系统 通信协议; Abstract Contemporary in communication and control system, often use UART (general asynchronous transceiver) to implement system auxiliary information transmission. UART although communication at a modest pace, but it has a circuit is simple, low cost a
3、nd reliable performance, especially suitable for the remote data transmission, etc. Therefore, in many of the communication speed demand is not high occasions, asynchronous serial mouth still plays a very important role, is widely used. And now the market UART function complex in application to use
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 毕业设计 系统 UART 接口 控制器 IP 设计
