二甲醚生产毕业设计
《二甲醚生产毕业设计》由会员分享,可在线阅读,更多相关《二甲醚生产毕业设计(59页珍藏版)》请在毕设资料网上搜索。
1、 - I - 摘摘 要要 目前生产二甲醚的方法不同,甲醇液相脱水法 ,合成气一步法,一氧化碳直接合 成法,甲醇气相脱水法等。不过,最主要的方法,气相甲醇脱水法制备二甲醚。该工艺 中,气相先将工业加热的甲醇脱水,二甲醚,冷凝和蒸发,蒸馏和类似的制造方法。使 用甲醇气相脱水法制备DME,主要做到以下几点:比较不同类型板的优点和缺点,选 择了气液传质筛板塔;完成二甲醚和甲醇回收塔的分离和塔高径,板布局设计;换热器的 计算,你需要选择水泵选型的类型和塔及辅助设备。 该设计包括设计说明书和图纸两部分。说明书包括确定过程,物料平衡,热平衡, 工艺设备的设计和选择,并进行初步的经济分析,如图纸,包括工艺流程
2、图,蒸馏设备 和工厂布局等图。 - II - The process design on dimethyl ether of annual output 200,000 tons Abstract There are various methods of producing dimethyl ether, such as liquid methanol dehydration, CO2 direct synthesis, synthesis from syngas, vapor methanol dehydration and so on. At present, however, vapor
3、 methanol dehydration is the main way. In the process of vapor phase method, methanol was heated and evaporated firstly ; and then ,was dehydrated; finally, dimethyl ether was condensated and rectified.DME was produced with the method of vapor methanol dehydration in this design. The tasks finished
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 甲醚 生产 毕业设计
