道路与桥梁工程毕业设计
《道路与桥梁工程毕业设计》由会员分享,可在线阅读,更多相关《道路与桥梁工程毕业设计(51页珍藏版)》请在毕设资料网上搜索。
1、 - i - 摘摘 要要 本设计为桂林至柳州一级公路第一标段,全长 2015.788m,设计为双向四车道,其 路幅划分为 4 3.75m(行车道)+2m(中间带)+2 2.5m(硬路肩)+2 0.75m(土路肩) +2 0.5m(路缘带),路基总宽度为 24.5m,本设计时速为 80km/h。途中两次跨越河流, 从城镇边缘去穿过,路幅宽度区经过一次居民区,为不影响居民拆迁,设置高架桥,本 设计共设置三处高架桥,长度分别为 340m、240m、280m,共长度为 860m,采用沥青 混凝土路面,提升行车舒适度,桂林是全国旅游名城,本道路建设开通,将方便柳州至 桂林的旅客出行,带动桂林旅游业的发展
2、,促进经济发展起到重要的作用。 关键词:一级公路;高架桥;路面。 - ii - ABSTRACT This design for guilin to liuzhou bid first level road, total length of 2015.788 m, designed to four lanes, the road image is divided into 4 x 3.75 m (driveway) + 2 m (middle) + 2 x 2.5 m (hard shoulder) + 2 * 0.75 m (dirt road shoulder) + 2 * 0.5 m (
3、side strip), roadbed total width of 24.5 m, the design speed of 80 km/h. Twice on the way across the river from the edge of town to go through the road width area through a residential area, for not affect residents relocation, set the viaduct, set up three viaduct in this design, the length of 340
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 道路 桥梁工程 毕业设计
