采矿工程毕业设计说明书
《采矿工程毕业设计说明书》由会员分享,可在线阅读,更多相关《采矿工程毕业设计说明书(81页珍藏版)》请在毕设资料网上搜索。
1、 I 摘 要 城山八矿生产能力1.8Mt/a新井设计, 共有5层可采煤层, 平均厚度为2.0m, 煤的工业片牌号为 1/3 焦煤。设计井田的可采储量为 178.08 Mt,服务年限为 63.99a,全矿井划分为二个水平开采。煤层平均倾角 16 ,井田平均走向长 5590m,平均倾向长 2864m。 设计矿井开拓方式为双立井开拓,采用分组集中大巷布置方式。共划分 6 个采区,首采区投产工作面 1 个。设计采区为中一采区,采区下部车场采用大 巷装车式, 走向长壁后退式综合机械化采煤方法。 年工作日为 330 天, 采用 “四、 六”工作制。通风方式为两翼对角式。 提升设备主井采用箕斗提升,副井采用
2、罐笼提升。 关键词关键词:可采储量 走向长壁 采煤方法 II Abstract The task of this design is to construct a 1.8million tons cheng zi he for Jixi Ming Administration.This mine has four minable Coal Seam, and its average thickness is 2.0 meters, types of coal seam is 1/3 coking coal. Designed field of minable capacity is 172.7
3、7 million tons. It can adapt for 63.9years, and is divided into two level. This mine shaft is applied to double indined shaft development method; Layout of gathing gallergand mining district eross heading; This level is divided into 6mining districts and 1 worked faces. Time of constructing shaft is
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 采矿工程 毕业设计 说明书
