a2o工艺污水处理厂毕业设计
《a2o工艺污水处理厂毕业设计》由会员分享,可在线阅读,更多相关《a2o工艺污水处理厂毕业设计(61页珍藏版)》请在毕设资料网上搜索。
1、 污水处理 A2O 工艺 摘 要 本次毕业设计的题目为新建城市污水处理厂设计( 15 万 m3/天) 工艺。主要任务是完成个该地区污水的处理设计。 其中初步设计要完成设计说明书一份、污水处理厂总平面图一张及污水处理厂污水与污泥高程图一张;单项处理构筑物施工图设计中,主要是完成 平面图和剖面图及部分大样图。 该污水处理厂工程,规模为 15 万吨 /日。 A2/O 工艺的生物处理部分由厌氧池、缺氧池和好氧池组成。厌氧池主要功能是释放磷 ,同时部分有机物进行氨化。缺氧池的主要功能是脱氮。好氧池是多功能的 ,能够去除 BOD、 硝化和吸收磷。 该污水厂的污水处理流程为:从泵房到沉砂池,进入 反应池,进
2、入辐流式二次沉淀池,再进入清水池,最后出水;污泥的流程为:从 反应池排出的剩余污泥进入集泥配水井,再由污水泵送入浓缩池,再进入消化池,最后进入脱水机房脱水,最后外运处置。 关键词: A2O;同步脱氮除磷;设计说明书 II Abstract The topic of this graduate design is about the design of the sewage disposal plant in the area of a City. The technics of the plant is the Anaerobic-Anoxic-Oxic. The main task is t
3、he primary design of the plant . The task of the primary design is that a design book、 a plan of the plant、 the high drawing of the disposal of sludge and sewage ;in the single disposal build design ,the harvest is that the section plane drawing、 the plan and some part magnifying drawings of the Ana
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- a2o 工艺 污水处理 毕业设计
