数控铣床毕业设计外文翻译 2

《数控铣床毕业设计外文翻译 2》由会员分享，可在线阅读，更多相关《数控铣床毕业设计外文翻译 2（29页珍藏版）》请在毕设资料网上搜索。

1、7.1 INTRODUCTION After lathes, milling machines are the most widely used for manufacturing applications. In milling, the workpiece is fed into a rotating milling cutter, which is a multi-point tool as shown in Fig. 7.1, unlike a lathe, which uses a single point cutting tool. The tool used in milling

2、 is called the milling cutter. Fig. 7.1 Schematic diagram of a milling operation The milling process is characterised by: (i) Interrupted cutting Each of the cutting edges removes material for only a part of the rotation of the milling cutter. As a result, the cutting edge has time to cool before it

3、 again removes material. Thus the milling operation is much more cooler compared to the turning operation. This allows for a much larger material rates. (ii) Small size of chips Though the size of the chips is small, in view of the multiple cutting edges in contact a large amount of material is remo

4、ved and as a result the component is generally completed in a single pass unlike the turning process which requires a large number of cuts for finishing. (iii) Variation in chip thickness This contributes to the non-steady state cyclic conditions of varying cutting forces during the contact of the c

5、utting edge with the chip thickness varying from zero to maximum size or vice versa. This cyclic variation of the force can excite any of the natural frequencies of the machine tool system and is harmful to the tool life and surface finish generated A milling machine is one of the most versatile mac

6、hine tools. It is adaptable for quantity production as well as in job shops and tool rooms. The versatility of milling is because of the large variety of accessories and tools available with milling machines. The typical tolerance expected from the process is about 0.050 mm. 7.2 TYPES OF MILLING MAC

7、HINES To satisfy various requirements milling machines come in a number of sizes and varieties. In view of the large material removal rates milling machines come with a very rigid spindle and large power. The varieties of milling machines available are: (i) Knee and Column type (a) horizontal (b) ve

8、rtical (c) universal (d) turret type These are the general purpose milling machines, which have a high degree of flexibility and are employed for all types of works including batch manufacturing. A large variety of attachments to improve the flexibility are available for this class of milling machin

9、es. (ii) Production (Bed) type (a) simplex (b) duplex (c) triplex These machines are generally meant for regular production involving large batch sizes. The flexibility is relatively less in these machines which is suitable for productivity enhancement. (iii) Plano millers These machines are used only for very large workpieces involving table travels in meters. (iv) Special type