毕业论文--齿轮泵泵体的加工工艺与专用夹具设计

《毕业论文--齿轮泵泵体的加工工艺与专用夹具设计》由会员分享，可在线阅读，更多相关《毕业论文--齿轮泵泵体的加工工艺与专用夹具设计（46页珍藏版）》请在毕设资料网上搜索。

1、大连交通大学 2013 届本科生大学毕业设计（论文） - - - 1 - 齿轮泵泵体的加工工艺与专用夹具设计 摘要 本次设计内容涉及了机械制造工艺及机床夹具设计、金属切削机床、公差配合与测量等多方面的知识。 泵体 加工工艺规程及其 铣削、 钻孔的夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析，了解零件的工艺再设计出毛坯的结构，并选择好零件的加工基准，设计出零件的工艺路线；接着对零件各个工步的工序进行尺寸计算，关键是决定出各个工序的工艺装备及切削用量；然后进行专用夹具的设计，选择设计出夹具的各个组成部件，如定位元件、夹紧元件、引导元件 、夹具

2、体与机床的连接部件以及其它部件；计算出夹具定位时产生的定位误差，分析夹具结构的合理性与不足之处，并在以后设计中注意改进。 关键词 工艺 、 工序 、 切削用量 、 夹紧 、 定位 大连交通大学 2013 届本科生大学毕业设计（论文） - - - 2 - Gear pump body process and special fixture design Abstract This design content has involved the machine manufacture craft and the engine bed jig design, the metal-cutting ma

3、chine tool, the common difference coordination and the survey and so on the various knowledge. Body process planning and drilling fixture was designed to include part machining process design, process design, and dedicated fixture design of three parts. In process design, analysis of the part must f

4、irst understand the parts of the process re-engineering the structure of a blank, and select a good part of the processing of the base to design parts process route； followed by the various working steps on the part of the procedures for the size of the calculation, the key is to determine the vario

5、us stages of work out of process equipment and cutting consumption； then dedicated fixture design, selection of design out of all the component parts fixture, such as the positioning components, clamping components, guiding elements, the specific folder connection with the machine parts and other components； calculate the positioning fixture positioning error generated, analysis fixture structure is reasonable and deficiencies, and attention to improving the design in the future. Key words ： The craft 、 the working procedure 、 the cutting specifications clamp、 the localization