外文翻译----步进电机基础

《外文翻译----步进电机基础》由会员分享，可在线阅读，更多相关《外文翻译----步进电机基础（16页珍藏版）》请在毕设资料网上搜索。

1、资料翻译 英文资料 Stepper Motor Basics TieluoLin.Jianxun Zhang DSP-based microstep controller of stepper motor Intelligent Control and Automation, 2004 Fifth World Congress on Volume 5, 15-19 June 2004. A stepper motor is an electromechanical device which converts electrical pulses into discrete mechanical

2、movements. The shaft or spindle of a stepper motor rotates in discrete step increments when electrical command pulses are applied to it in the proper sequence. The motors rotation has several direct relationships to these applied input pulses. The sequence of the applied pulses is directly related t

3、o the direction of motor shafts rotation. The speed of the motor shafts rotation is directly related to the frequency of the input pulses and the length of rotation is directly related to the number of input pulses applied. Stepper Motor Advantages and Disadvantages Advantages 1. The rotation angle

4、of the motor is proportional to the input pulse. 2. The motor has full torque at standstill (if the windings are energized) 3. Precise positioning and repeatability of movement since good stepper motors have an accuracy of 3 5% of a step and this error is non cumulative from one step to the next. 4.

5、 Excellent response to starting/stopping/reversing. 5. Very reliable since there are no contact brushes in the motor. Therefore the life of the motor is simply dependant on the life of the bearing. 6. The motors response to digital input pulses provides open-loop control, making the motor simpler an

6、d less costly to control. 7. It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the shaft. 8. A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses. Disadvantages 1. Resonances can occur

7、if not properly controlled. 2. Not easy to operate at extremely high speeds. Open Loop Operation One of the most significant advantages of a stepper motor is its ability to be accurately controlled in an open loop system. Open loop control means no feedback information about position is needed. This

8、 type of control eliminates the need for expensive sensing and feedback devices such as optical encoders. Your position is known simply by keeping track of the input step pulses. Stepper Motor Types There are three basic stepper motor types. They are : Variable-reluctance Permanent-magnet Hybrid Var

9、iable-reluctance (VR) This type of stepper motor has been around for a long time. It is probably the easiest to understand from a structural point of view. Figure 1 shows a cross section of a typical V.R. stepper motor. This type of motor consists of a soft iron multi-toothed rotor and a wound stator. When the stator windings are energized with DC current the poles become magnetized. Rotation occurs when the rotor teeth are attracted to the energized stator poles.