2018年注塑成型外文翻译--影响塑料注塑成型能耗的工艺参数分析

《2018年注塑成型外文翻译--影响塑料注塑成型能耗的工艺参数分析》由会员分享，可在线阅读，更多相关《2018年注塑成型外文翻译--影响塑料注塑成型能耗的工艺参数分析（20页珍藏版）》请在毕设资料网上搜索。

1、3600 英文单词， 19500 英文字符 ， 中文 5600 字 文献出处： Meekers I, Refalo P, Rochman A. Analysis of Process Parameters affecting Energy Consumption in Plastic Injection MouldingJ. Procedia CIRP, 2018, 69: 342-347. Analysis of Process Parameters affecting Energy Consumption in Plastic Injection Moulding Isaac Meeker

2、s, Paul Refalo, Arif Rochman Abstract Sustainable manufacturing has become essential amongst industries of all types due to the diminishing non-renewable sources and an ever- increasing demand for environmentally friendly products. Injection moulding is one of the most widely used processes for the

3、production of plastic products and is a large consumer of energy. Energy efficiency has become a serious concern due to the rising energy costs and the associated environmental impacts. IEA (2007) reports that one third of the global energy consumption and 36 percent of C0 emissions are attributed t

4、o the manufacturing sector. The aim of this study was to optimize the injection moulding process in order to reduce energy consumption whilst also ensuring no loss in part quality. This was achieved by investigating the impacts of cooling time, screw rotational speed, mould temperature and nozzle te

5、mperature. It was found that the cooling time and the nozzle temperature had the greatest impact on energy consumption. The mass and length of the part were not affected by any of the parameters within the selected processing windows, while the surface roughness was slightly influenced by the mould

6、temperature range. Results indicated a possibility of using lower cycle times and lower nozzle temperatures to decrease energy consumption without having adverse impact on part quality. When comparing the energy consumption while using process parameters set at their minimum values compared to midpoint values, savings of 14 percent were achieved. Keywords: Sustainability; Energy Consumption; Sustainable Manufacturing; Injection Moulding; Process Parameter Optimization 1. Introduction Industr