基于PROE的调料勺注射模具设计毕业论文

《基于PROE的调料勺注射模具设计毕业论文》由会员分享，可在线阅读，更多相关《基于PROE的调料勺注射模具设计毕业论文（56页珍藏版）》请在毕设资料网上搜索。

1、I 基于基于 PRO/EPRO/E 的调料勺注射模具设计的调料勺注射模具设计 摘要：摘要：本课题在深入市场调查的基础上以家庭厨房用品的使用为背景，用 PRO/ENGINEER WILDFIRE 3.0 及外挂模块 PRO/MOLDESIGN、Plastic Advisor、 EMX4.1， 设计了一套一模二腔调料勺的注塑模具。 在整个调料勺模具设计过程中， 涉及到了调料勺的结构设计、调料勺的塑性分析、注塑机和模架的选择及注塑机 的一些重要工艺参数的校核，并详细叙述了模具设计中的分型面设计、浇注系统 设计、成型零件设计、脱模机构设计等。本调料勺材料选用 PS，从而保证了塑 件良好的成型质量，降低

2、了模具的制造成本。设计过程，由于采用 Plastic Advisor 等著名的设计分析软件，最终优化了模具设计参数并提高了设计效率。 关键词：关键词：PRO/E；调料勺；模流分析；模具设计 II Design of the Injection Mold for Spoon-sauce Based on Pro/E Abstract：The subject is on the basis of the in-depth market research and as the use of family kitchen supplies for background. Designing a pla

3、stic module which can produce two pieces of spoon-sauce at the same time with PRO/ENGINEE wildfire 3.0 and extrapolated using modules Pro/MOLDESIGN, Plastic Advisor, EMX 4.1. In the whole process, the design of the spoon-sauce, mold flow analysis, the choosing of the injection machine and mold base,

4、 and the checkout of some important technique parameters of the injection machine are all referred to. parting surface design, injection system design, molding parts design and ejection system design are discussed detailed. This plastic parts choose PS for the material，which ensured that the high quality product could be taken out from the injection mould and the cost of the mould was decreased. In the design process, because Using Plastic Advisor as the design analysis tool. So it cuts down t