毕业论文---汽车ABS逻辑门限值控制算法仿真研究
《毕业论文---汽车ABS逻辑门限值控制算法仿真研究》由会员分享,可在线阅读,更多相关《毕业论文---汽车ABS逻辑门限值控制算法仿真研究(32页珍藏版)》请在毕设资料网上搜索。
1、 题 目 汽车 ABS 逻辑门限值控制算法仿真研究 摘 要 汽车防抱死制动系统是在制动时防止车轮抱死的一种机电一体化系统。逻辑门 限值控制方式的特点是不需要建立具体系统的数学模型,并且对系统的非线性控制 很有效。本文依据ABS的工作原理,利用车轮加减角速度门限值及参考滑移率的组 合, 构成控制逻辑, 把滑移率调整在峰值附着系数附近波动。采用Matlab/Simulink 仿真环境, 对不同附着路面下有、无ABS逻辑门限值控制的制动效果进行仿真对比 分析,验证了基于逻辑门限值的ABS的控制效果:减小了制动距离和制动时间,增大 了制动减速度。 关键词: 制动防抱死系统;逻辑门限值控制;仿真; AB
2、STRACT Automobile anti-lock braking system is at the time of braking to prevent wheel lock is a mechanical and electrical integration system. Logic threshold control method features no need to establish specific mathematical model of the system, and the system nonlinear control is very effective. On
3、 the basis of the working principle of ABS, using wheel and angular velocity threshold value and reference slip ratio combination, constitute the control logic, the slip rate adjustment in friction coefficient near fluctuation. The use of Matlab/Simulink simulation environment, roads of different ad
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 毕业论文 汽车 ABS 逻辑 门限 控制 算法 仿真 研究
