毕业设计-----房屋内外照明控制系统设计

《毕业设计-----房屋内外照明控制系统设计》由会员分享，可在线阅读，更多相关《毕业设计-----房屋内外照明控制系统设计（44页珍藏版）》请在毕设资料网上搜索。

1、 摘 要 本文以 LOGO!230RC 和扩展模块 DM8 230R 为核心，针对现代家居条件的 改善，环保节能理念日益加强的市场需求，结合了西门子 LOGO 的技术性能， 设计了一种智能、节能的照明控制系统。文中详述了西门子 LOGO 的产生与发 展历程及其功能指标参数和特点。按照房屋内外照明控制系统的控制要求，进行 了 LOGO!硬件选型，以及外围电路的设计。并通过 LOGO! Soft Comfort v5.0.22 软件下实现照明控制过程的仿真、调试，最终下载到 LOGO！中实际运行，验证 了 LOGO!的实用性和可靠性。 本文中基于逻辑控制模块 LOGO!设计的房屋内外照明控制系统，

2、 结构紧凑， 操作方便，提高了控制系统的稳定性，延长了其维护周期和使用寿命，提高了电 动设备工作效率和产品可靠性；使用逻辑模块 LOGO!设计的房屋内外照明控制 系统，符合现代设计的最优理念；同时，本系统投资少、易维护、编程简单、节 约电能、可靠性高，它完全可以替代传统成本高，效率低的控制器件，在小区、 别墅等照明控制领域中有着良好的应用前景。 关键词：关键词：控制系统，房屋室内外照明，LOGO!，时间控制，光强度控制 ABSTRACT In this paper, by use of LOGO! 230RC and the expansion module DM8 230R as the c

3、ore, for the market demand such as the improvement of modern home environment, growing increasingly of environmental protection and energy conservation ideas, etc., an intelligent energy-conservation lighting control system is designed which combined with Siemens LOGO！ technical performance. The gen

4、eration and development process of Siemens LOGO！, and its function parameters and characteristics are detailed in the paper. The LOGO! hardware is selected and periphery circuits are designed to meet the control requirements of inside and outside houses lighting control system. The simulation and debugging of the lighting control process are achieved based on LOGO! Soft Comfort v5.0.22 software. Finally the software is downloaded to the LOGO! and the practicality and reliability of the LOGO! are