输电线路毕业设计---35kV输电线路工程设计
《输电线路毕业设计---35kV输电线路工程设计》由会员分享,可在线阅读,更多相关《输电线路毕业设计---35kV输电线路工程设计(89页珍藏版)》请在毕设资料网上搜索。
1、 35kV 输电线路工程设计输电线路工程设计 摘要:摘要:本设计讲述了架空输电线路设计的全部内容,主要设计步骤是按架空输电线路设 计书中的设计步骤,和现实中的设计步骤是不一样的。本设计包括导线、地线的比载、 临界档距、最大弧垂的判断,力学特性的计算,定位排杆,各种校验,代表档距的计算, 杆塔荷载的计算,接地装置的设计,金具的选取。在本次设计中,重点是线路设计,杆塔 定位和基础设计,对杆塔的组立施工进行了简要的设计,还简单地设计基础并介绍基础施 工。 关键词:关键词: 导线 避雷线 比载 应力 弧垂 杆塔定位 Abstract:In this text, it includes all the
2、steps in of overhead power transmission line design, which is Accordance withthe design of overhead power transmission line , but it is not the same with the reality .this article discussed the conductor and the ground wires comparing load critical span .the maximum arc-perpendiculer judgement .mech
3、anics propertys fixed position of shaft-tower. various checking .representative spans calculating. load ppplied on iron tower calculating. equipment used in the ground connection design. metal appliance choose .In this paper, it is the focal point of line design. iron tower design and fundament desi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 输电 线路 毕业设计 35 kV 工程设计
