《仓库温度湿度监控系统毕业设计》由会员分享,可在线阅读,更多相关《仓库温度湿度监控系统毕业设计(46页珍藏版)》请在毕设资料网上搜索。
1、毕业设 计 (论文 ) 任务书 题 目 仓库温度湿度监测系统设计 学生姓名 李 立龙 学号 200805010219 专业班级 测控 0802 设计(论文)内容及基本要求 设计一个单片机 仓库温度湿度监测系统 。 主要要求: 1. 学习掌握单片机的有关知识; 2. 查阅相关资料; 3. 撰写开题报告; 4. 完成 仓库温度湿度监测系统电路设计; 5. 编写软件并对系统进行计算机仿真; 6. 撰写毕业设计论文; &n
2、bsp;7. 翻译 1.5 万字符的英文资料。 设计(论文)起止时间 2012 年 3 月 1 日 至 2012 年 6 月 5 日 设计(论文)地点 西安石油大学 指导教师签名 年 月 日 系(教研室)主任签名 年 月 日 学生签名 年 月
3、日 西安石油大学本科毕业设计(论文) 仓库温度湿度监测系统的设计 摘 要 : 本 课题设计 是一种基于 AT89C51 单片机和温湿度传感器的温 、 湿度监测系统 。 本系统具有可读性高,稳定性高,反应速度快,测量值准确的特点 。论文叙述 了单片机 、 温度传感器 DS18B20、 湿度传感器 HS1101 的原理,介绍了系统 的硬件和软件设计 。并 利用 proteus 软件进行电路的原理图及 PCB 图绘制。 这个系统 的功能是:通过按下不同的功能键来向单片机输入控制信号,控制温湿度的报警线,并在数码显示管上显示出对应的数值。系统利用 Pr
4、oteus 与 Keil 软件的联调来实现仿真功能,基本上达到了系统的设计要 求。 关键词 : 单片机,温度传感器 DS18B20,湿度传感器 HS1101 西安石油大学 本科 毕业设计 (论文) The design about temperature and humidity measurement system of warehouse Abstract: This paper designed a temperature and humidity measurement system of warehouse which based on AT89C
5、51 and temperature and humidity measurement. This system has a readable, high stability, reaction speed, measured values exact characteristic.The paper includes the principle of microcontroller, temperature sensor DS18B20, humidity sensor HS1101 and system of hardware and software design, procedures
6、, debug the software and hardware at the same time. In the process of designing, Proteus is used to plot schematic diagram and PCB diagram,Implemented functions are: transmitting control signals to the microcontroller by pressing different buttons, controlling the alarm line of temperature and humid
7、ity measurement, Through the press different function keys to single chip microcomputer control signal input, control of the temperature and humidity alarm line, and in the digital by LCD display the line 1602showed on the corresponding numerical. Proteus and Keil software system using the alignment to realize simulation function, basically achieved the design of the system requirements. Keyword: microcontroller, temperature sensor DS18B20,