机械毕业设计--3000升开式搪玻璃反应釜的设计

《机械毕业设计--3000升开式搪玻璃反应釜的设计》由会员分享，可在线阅读，更多相关《机械毕业设计--3000升开式搪玻璃反应釜的设计（50页珍藏版）》请在毕设资料网上搜索。

1、内蒙古科技大学毕业设计 1 3000 升开式搪玻璃反应釜的设计 摘要 ： 搪玻璃设备具有质量好、耐腐蚀等优点，对资源的节约、我国经济发展和石油工业的发展起着巨大的作用。设计一台操作容积为 3000L 的搪玻璃反应釜，全容积为 3715L。按照 GB150-1998钢制压力容器， HG2432-2001搪玻璃设备技术条件， HG/T2371-2003搪玻璃开式搅拌容器 进行设计、制造、检验和验收。 容器圆筒的材料为 Q235B，工作压力为 0.4MPa，工作温度为 0 200；夹套材料为 Q235B，工作压力为 0.6MPa，工作温度为 0 200。 此次设计主要进行了 搪玻璃反应釜 的结构设计

2、和强度计算。 进行了圆筒壁厚计算，夹套的壁厚计算，电动机轴功率校核，搅拌器强度校核，开孔补强计算，耳座的校核等。该设备按 JB/T4709-2009 进行焊接，焊缝进行无损探伤。该设备应根据 TSG R0004-2009固定式压力容器安全技术监察规程和压力容器定期检验规则的要求定期检验。 关键词： 搪玻璃；反应釜；耐腐蚀 内蒙古科技大学毕业设计 2 The design for 3,000 litres open-cycle glass lining reaction kettle Abstract: Glass-lined equipment with good quality, corro

3、sion resistance, etc., resource conservation, economic development and the development of the oil industry plays a huge role. The design operating glass-lined reactor with a volume of 3000L, 3715L full volume. Steel pressure vessel in accordance with the GB150-1998 HG2432-2001 glass-lined equipment

4、technical conditions , HG/T2371-2003 glass-lined open mixing vessel for the design, manufacture, inspection and acceptance. The material of the container cylinder Q235B, working pressure to 0.4MPa, the operating temperature of 0 to 200 C； jacket material for Q235B, working pressure of 0.6MPa, the op

5、erating temperature of 0 to 200 C. The design is mainly for the structural design and strength calculation of glass-lined reactor. Cylinder wall thickness, the wall thickness of the jacket, the motor shaft power check, stirrer strength check, opening reinforcement calculation, ear seat check. The de

6、vice JB/T4709-2009 welding, weld NDT. The equipment should be based on the requirements of the TSG R0004-2009 fixed-pressure vessel safety technology to monitor the procedures and regular pressure vessel inspection rules periodic inspection. Key words: Honing glass ； reaction kettle； corrosion resistance.