双工无线语音数据传输系统外文翻译

《双工无线语音数据传输系统外文翻译》由会员分享，可在线阅读，更多相关《双工无线语音数据传输系统外文翻译（9页珍藏版）》请在毕设资料网上搜索。

1、双工无线语音数据传输系统的设计 Triple wireless voice data transmission system design Student :, Instructor :, University Every day, in our work and in our leisure time, we come in contact with and use a variety of modern communication media, the most common being the telephone, radio, television, and the Internet.

2、 Though these media we are able to communicate (nearly) instantaneously with people on diffident continents, transact our daily business, and receive information about various developments and events of note that occur all around the world. Electronic mail and facsimile transmission have made it pos

3、sible to rapidly communicate written message across great distances. Wireless communications. The development of wireless communications stems from the works of Oersted, Faraday, Gauss, Maxwell, and Hertz. In1820, Oersted demonstrated that an electric current produces a magnetic field. On August 29,

4、1831,Michael Faraday showed that an induced current is produced by moving a magnet in the vicinity of a conductor. Thus, he demonstrated that a changing magnetic field produces an electric field. With this early work as background, James C. Maxwell in 1864 predicted the existence of electromagnetic

5、radiation and formulated the basic theory that has been in use for over a century. Maxwells theory was verified experimentally by Hertz in 1887. In 1894, a sensitive device that could device that could detect radio signals, called the coherer, was used by its inventor Oliver Lodge to demonstrate wir

6、eless communication over a distance of 150 yards at Oxford, England. Guglielmo Marconi is credited with the development of wireless telegraphy. Marconi demonstrated the transmission of radio signals at a distance of approximately 2 kilometers in 1895. Two years later, in 1897 , he patented a radio t

7、elegraph system and established the Wireless Telegraph and Signal Company. On December 12, 1901, Marconi received a radio signal at Signal Hill in Newfoundland, which was transmitted from Cornwall, England, a distance of about 1700 miles. The invention of the vacuum tube was especially instrumental

8、in the development of radio communication system .The vacuum diode was invented by Fleming in 1904 and the vacuum triode amplifier was invented by De Forest in 1906, as previously indicated. The invention of the triode made radio broadcast possible in the early part of the twentieth century. Amplitu

9、de modulation (AM) broadcast was initiated in 1920 when radio station KDKA, Pittsburgh, went on the air. From that date, AM radio broadcasting grew rapidly across the country and around the world. The super heterodyne AM radio receiver, as we know it today, was invented by Edwin Armstrong during Wor

10、ld War I. Another significant development in radio communications was the invention of Frequency modulation (FM), also by Armstrong. 双工无线语音数据传输系统的设计 In 1933, Armstrong built and demonstrated the first FM communication system. However, the use of FM was slow to develop compared with AM broadcast. It

11、was not until the end of World War II that FM broadcast gained in popularity and developed commercially. The first television system was built in the United States by V. K. Zworykin and demonstrated in 1929. Commercial television broadcasting began in London in 1936 by the British Broadcasting Corpo

12、ration(BBC) . Five years later the Federal Communications Commission(FCC) authorized television broadcasting in the United States. ELEMENTS OF AN ELECTRICAL COMMUNICA SYSTEM Electrical communication systems are designed to send messages or information from a source that generates the message to one

13、more destinations. In general, a communication system can be represented by the functional block diagram shown . The information generated by the source may be of the form of voice (speech source), a picture (image source), or plain text in some particular language, such as English , Japanese, Germa

14、n , French, etc. An essential feature of any source that generates information is that its output is described in probabilistic terms； i.e., the output of a source is not deterministic. Otherwise, there would be no need to transmit the message. A transducer is usually required to convert the output

15、of a source into an electrical signal that is suitable for transmission. For example, a microphone serves as the transducer that converts an acoustic speech signal. At the destination, a similar transducer is required to convert the electrical signals that are received into a form that is suitable f

16、or the user； e.g., acoustic signals, images, etc. The heart of the communication system consists of three basic parts, namely, the transmitter, the channel, and the receiver. The functions performed by these three elements are described next. The Transmitter. The Transmitter converts the electrical

17、signal into a form that is suitable for transmission though the physical channel or transmission medium. For example, in radio and TV broadcast, the Federal Communications Commission (FCC) specifies the frequency range for each transmitting station. Hence, the transmitter must translate the informat

18、ion signal to be transmitted into the appropriate The Transmitter range that matches the frequency allocation assigned to the transmitter. Thus, signal transmitted by multiple radio station do not interfere with one another. Similar functions are performed in telephone communication systems where th

19、e electrical speech signals from many users are transmitted over the same wire. In general, the transmitter performs the matching of the message signal to the channel by a process called modulation. Usually, modulation involves the use of the information signal to systematically vary either the ampl

20、itude, frequency, or phase of a sinusoidal carrier. For example, in AM radio broadcast, the information signal that is transmitted is contained in the amplitude variations of the sinusoidal carrier, which is the center frequency in the amplitude modulation. In FM radio broadcast., the information si

21、gnal that is transmitted is contained in the frequency variations of the 双工无线语音数据传输系统的设计 sinusoidal carrier. This is an example of frequency modulation. Phase modulation (PM) is yet a third method for impressing the information signal on a sinusoidal carrier. In general, carrier modulation such as A

22、M, FM, and PM is performed at the transmitter, as indicated above, to convert the information signal to a form that matches the characteristics of the channel. Thus, though the process of modulation, the choice of the type of modulated in frequency to match the allocation of the channel. The choice

23、of the type of modulation is based on several factors, such as the amount of bandwidth over the channel, the type of noise and the interference that the signal encounters in transmission. In any case, the modulation process makes it possible to accommodate the transmission of multiple messages from

24、many users over the same physical channel. In addition to modulation, other functions that are usually performed at the transmitter are filtering of the information-bearing signal , amplification of the modulated signal, and in case of wireless transmission, radiation of the signal by means of a tra

25、nsmitting antenna. The channel. The communications channel is the physical medium that is used to send the signal from the transmitter to the receiver. In wireless transmission, the channel is usually the atmosphere (free space). On the other hand, telephone channels usually employ a variety of phys

26、ical media, including wirelines, optical fiber cables, and wireless (microwave radio). Whatever the physical medium for signal transmission, the essential feature is that the transmitted signal is corrupted in a random manner by a variety of possible mechanisms. The most common from of signal degrad

27、ation comes in the form of additive noise ,which is generated at the front end of the receiver, where signal amplification is performed. This noise is often called thermal noise. In wire less transmission, additional additive disturbances are man-made noise, and atmospheric noise picked up by a rece

28、iving antenna. Automovile ignition noise is an example of man-made noise, and electrical lightning discharges from thunderstorms is an example of atmospheric noise. Interference from other users of the channel is another form of additive noise that often arises in both wireless and wire line communi

29、cation systems . In some radio communication channels, such as the ionospheric channel that is used for long range ,short-wave radio transmission, another form of signal degradation is multipath propagation. Such signal distortion is characterized as a nonadditive signal disturbance which manifests

30、itself as time variations in the signal amplitude, usually called fading . Both additive and nonadditive signal distortions are usually characterized as random phenomena and described in statistical terms. The effect of these signal distortions must be taken into account on the design of the communi

31、cation system. In the design of a communication system, the system, the system designer works with mathematical models that statistically characterize he signal distortion encountered on physical channels. Often, the statistical description that is used in mathematical model is a result of actual empirical measurements obtained from experiments involving signal transmission over such channels .In such cases , there is