外文翻译--锂电池充电器的设计
《外文翻译--锂电池充电器的设计》由会员分享,可在线阅读,更多相关《外文翻译--锂电池充电器的设计(11页珍藏版)》请在毕设资料网上搜索。
1、南 昌 工 程 学 院 09 级毕业(设计)论文文献翻译 机械与电气工程学院 系(院) 电气工程及其自动化 专业 题 目 锂电池充电器的设计 学 生 姓 名 纪炜焕 班 级 09 电气工程及其自动化( 1)班 学 号 2009100106 指 导 教 师 饶繁星 日 期 2013 年 1 月 4 日 南 昌 工 程 学 院 教 务 处 订 制 The design of the lithium battery charger Introduction Li-Ion rechargeable batteries are finding their way into many applicatio
2、ns due to their size, weight and energy storage advantages.These batteries are already considered the preferred battery in portable computer applications, displacing NiMH and NiCad batteries, and cellular phones are quickly becoming the second major marketplace for Li-Ion. The reason is clear. Li-Io
3、n batteries offer many advantages to the end consumer. In portable computers,Li-Ion battery packs offer longer run times over NiCad and NiMH packs for the same form factor and size, while reducing weight. The same advantages are true for cellular phones. A phone can be made smaller and lighter using
4、 Li-Ion batteries without sacrificing run time. As Li-Ion battery costs come down, even more applications will switch to this lighter and smaller technology. Market trends show a continual growth in all rechargeable battery types as consumers continue to demand the convenience of portability. Market
5、 data for 1997 shows that approximately 200 million cells of Li-Ion will be shipped, compared to 600 million cells of NiMH. However, it is important to note that three cells of NiMH are equivalent to one Li-Ion cell when packaged into a battery pack. Thus, the actual volume is very close to the same
6、 for both. 1997 also marked the first year Li-Ion was the battery type used in the majority of portable computers, displacing NiMH for the top spot. Data for the cellular market showed a shift to Li-Ion in the majority of phones sold in 1997 in Europe and Japan.Li-Ion batteries are an exciting batte
7、ry technology that must be watched. To make sense of these new batteries, this design guide explains the fundamentals, the charging requirements and the circuits to meet these requirements. Along with more and more the emergence of the handheld electric appliances, to the high performance, baby size
8、, weight need of the light battery charger also more Come more big.The battery is technical to progress to also request continuously to refresh the calculate way more complicatedly is fast with the realization, safety of refresh.Therefore need Want to carry on the more accurate supervision towards r
9、efreshing the process, to shorten to refresh time and attain the biggest battery capacity, and preventfrom the battery Bad.The AVR has already led the one step in the competition, is prove is perfect control chip of the next generation charger. The microprocessor of Atmel AVR is current and can prov
10、ide Flash, EEPROM and 10 ADCses by single slice on the market Of 8 RISC microprocessors of the tallest effect.Because the saving machine of procedure is a Flash, therefore can need not elephant MASK ROM Similar, have a few software editions a few model numbers of stock.The Flash can carry on again t
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 外文 翻译 锂电池 充电器 设计
