外文翻译---发动机活塞连杆组—活塞详解

《外文翻译---发动机活塞连杆组—活塞详解》由会员分享，可在线阅读，更多相关《外文翻译---发动机活塞连杆组—活塞详解（18页珍藏版）》请在毕设资料网上搜索。

1、河南理工大学本科毕业 设计英文翻译 1 The machine piston connecting rod set- detailed exposition of piston The piston connecting rod set is composed of the piston, piston wreath, piston pin, connecting rod, connecting rod axle bush, etc. . effect: The effect of the piston is to bear the air pressure, and pass to conn

2、ecting rod to drive the bent axle to revolve through connecting rod axle bush, the piston coping is still a part of the burning room. The work condition: Piston works under the condition of heat, high pressure, high speed, and bad lubrication .Piston directly contacts with the heat air. The temperat

3、ure can amount to above 2500 Ks in a moment .The piston is heated severely, but the condition of spreading the hot is bad .So while the piston works, the temperature is very high and the coping is up to the 600-700 Ks: And the temperature distributes asymmetrically； The piston coping bears great air

4、 pressure, especially the pressure is greatest in the route of doing efficacy. The gasoline machine is up to the 3-5MPas, the diesel engine is up to the 6-9MPas.This makes the piston produce pound, 河南理工大学本科毕业 设计英文翻译 2 and bear the function of the side pressure. Therefore, the piston should have enou

5、gh heat-proof, try to decrease the heating area, strengthen the cooling of the piston, to make the highest temperature of the coping descend .The piston moves at very high speed(8-12 ms/ s) back and forth in the air cylinder, and speed changes constantly, This produces very great inertial dint, maki

6、ng the piston bear great additional load working under such bad condition, the piston will become deformed heating power. At the same time ,it slitters the chemical corrosive power of the burning gas .In order to descend the inertial dint of back and forth, we must ease the weight of the piston as p

7、ossible .Piston works under the condition of the heat, high pressure, high speed(the average speed can amount to the 101115 m/ s), and its lubricant condition is bad and the frication between the piston and the air cylinder wall is very great. In order to descend the friction, the surface of the piston surface must be wear-resistant. Request: (1) To have enough rigidity and strength, and the reliable dint； (2) Transmit heat well, bear the high pressure, bear the heat and