啤酒清洗灌装控制系统设计毕业论文（含外文翻译）

《啤酒清洗灌装控制系统设计毕业论文（含外文翻译）》由会员分享，可在线阅读，更多相关《啤酒清洗灌装控制系统设计毕业论文（含外文翻译）（44页珍藏版）》请在毕设资料网上搜索。

1、 I 啤酒清洗灌装控制系统设计啤酒清洗灌装控制系统设计 摘摘 要要 本设备是专为啤酒桶的清洗、消毒设计的。该设备可以自动完成清洗消毒及 CO2备压 等全部工序。本设备适用桶的尺寸为高度 H360H560，直径250500。本机主要由 机架、电气控制箱、电磁阀、气动元件、气冲系统和水路系统组成。本机控制单元采用以 三菱公司的可编程控制器为核心对机器进行全过程控制。 由于可编程控制器在工业控制方 面的应用意义日趋明显，已在机械制造、发电、化工、电子等行业工艺设备的电气控制方 面得到了广泛的应用。它具有功能强大、使用可靠、维修简单等许多优点，并且在很多地 方已逐步取代了继电器电路的逻辑控制。本文讨论

2、的是 PLC 在实际工业控制系统的应用。 关键词关键词： ；管路系统； 清洗机 II Beer Beer C Cleaning leaning F Filling illing C Controontrol l S System ystem D Designesign AbstractAbstract This equipment designed for cleaning and sterilizing casks. The equipment is automatic. The key processes contain discharging remnants, swilling wit

3、h water, swilling with disinfectant, swilling with aseptic water and inflating with CO2. The height of cask is 360560.The diameter is 250500. The equipment is made of chassis, control unit, electromagnetic valve and piping. The center of manipulative unit is the MITSUBISHI PLC. PLC controls all of t

4、he running processes. Applied meaning that programmable logic controller have in its control the aspect in the industry gradually obvious, combine at manufacture ， generate electricity, chemical engineering, electr onics etc profession craft the equipments electricity control the aspect got the extensive application. It have the function strong and big, the usage is dependable, maintain the many advantage of simple etc., and already and gradually replaced after the logic co