毕业论文-温室温度自动控制系统设计

《毕业论文-温室温度自动控制系统设计》由会员分享，可在线阅读，更多相关《毕业论文-温室温度自动控制系统设计（35页珍藏版）》请在毕设资料网上搜索。

1、 I 温室温度自动控制系统设计 摘 要 本系统以 AT89C51 单片机为控制核心，利用温度传感器 AD590 对蔬菜大棚内的 温度进行实时采集与控制，实现温室温度的自动控制。本系统由单片机小系统模块、 温度采集模块、加热模块、降温模块、按键以及显示模块六个部分组成。可以通过 按键设定温室的温度值，采集的温度和设定的温度通过 LED 数码管显示。当所设定 的温度值比采集的温度大时，通过加热器加热，以达到设定值；反之，开启降温风 扇，以快速达到降温效果。通过该系统，对蔬菜大棚内的温度进行有效、可靠地检 测与控制，从而保证大棚内作物在最佳的温度条件下生长，提高质量和产量。 关键词：单片机；温度传感

2、器；温度控制；温度显示；键盘输入；温室 II Automatic Temperature-Control System of Greenhouse Abstract This system takes the AT89C51 single chip as the control core, using the temperature sensor AD590 to carry on real-time gathering and controlling to the greenhouse of vegetables, so it can realizes auto-control to the

3、 greenhouses temperature. This system contains the miniature single chip system module, the temperature gathering module, the heater module, the drop-temperature module, the key pressed module and the display module. The gathering temperature or the setting temperature is displayed through the seven

4、-seg LED. It can be established new temperature value in the greenhouse through pressing buttons, when this temperature value is higher than the gathering temperature value, then makes the heater work in order to achieve the defined value; Otherwise, the heater knocks off, and opens the ventilator as fast as to achieve the supposed temperature. It will be effective and reliable to exam and control the temperature of the greenhouse by using this system, thus guarants the crop growing fine under