毕业论文---水温控制系统
《毕业论文---水温控制系统》由会员分享,可在线阅读,更多相关《毕业论文---水温控制系统(15页珍藏版)》请在毕设资料网上搜索。
1、 毕业生毕业设计 学生姓名: 学生学号: 专 业: 计算机应用技术 系 别: 指导教师: 指导系部: 年 月 日 水温控制系统水温控制系统 专业:计算机系计算机应用 班级:班 姓名: 指导教师: 摘要摘要: 该系统由液晶屏显示模块,键盘控制模块,水温测控模块,继电器模块和报警模块组 成。 采用单片机 EasyARM1138 进行温度的实时采集与控制,其中温度信号由“一线总线”数字 化温度传感器 DS18B20 提供,温度的设定范围为 4090,最小区分度为 0.02。利用继 电器控制电热丝进行升降温,以达到实时控制温度的目的。该系统具备较高的测量精度和 控制精度,能够准确地完成温度的升降控制。
2、 Abstract: The system consists of liquid crystal display module, keyboard module, temperature measurement and control module, relay module and alarm module. Single-chip EasyARM1138 for real-time acquisition and control temperature, which temperature signal from the bus line to provide digital temper
3、ature sensor DS18B20 temperature setting range is 40 90 , minimum differentiation is 0.02 . Using of the relay control wire for electric heating and cooling, in order to achieve real-time control of temperature. The system has high precision and control accuracy, the ability to accurately complete c
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中设计图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 毕业论文 水温 控制系统
