毕业论文---某校园网有线及无线网络规划设计

《毕业论文---某校园网有线及无线网络规划设计》由会员分享，可在线阅读，更多相关《毕业论文---某校园网有线及无线网络规划设计（28页珍藏版）》请在毕设资料网上搜索。

1、 摘摘 要要 国内的校园网绝大部分都是采用有线的方式构建的， 缺少有线和无线相结合的相关方 案。在有线网络中，以太网是目前应用最广泛的局域网技术，具有开放性、低成本和广泛 应用的软硬件支持等明显优势。 以太控制网克服了现场总线的不足， 已成为控制网络的新 趋势。而无线网络因为具有使用方便、不用布线、施工量少、维护轻松的特性，在未来的 网络技术中必将成为主流，所以在设计无线接入的方案时，既要保证对有线网络的兼容， 以最大限度地避免资源浪费， 也要放眼未来， 保证现有技术到未来新型网络技术的平滑过 渡。构建一个优秀的有线及无线的校园网络的方案，能大大提高学生、教师们的学习和工 作效率。 本文通过对

2、我国目前校园网建设情况的分析,并在综合考察有线网络和无线网络技术 的应用状况后,简要的介绍了学校有线及无线网络的规划与设计。本文主要从校园网建设 的需求分析、校园网建设目标、组网技术要求、方案整体设计、网络设备选型、设备配置、 网络测试与验收等方面进行了比较详细的分析与描述。 提出了组建有线及无线校园网的 必要性、可行性以及其具体的组建方案。 关键词：关键词：有线网络 无线网络 规划设计 Abstract Domestic campus network, for the most part, are all adopt the way of the cable built, related t

3、o the lack of the combination of wired and wireless solutions. In wired networks, Ethernet is the most widely used LAN technology, openness, low cost and wide application of software and hardware support, etc. Obvious advantages. Ethernet control network to overcome the deficiency of the fieldbus, h

4、as become a new trend of control network. And a wireless network because is easy to use, no wiring, less construction, easy maintenance features, in the network technology of the future will become the mainstream, so in the design of wireless access solutions, both to ensure the compatibility of cab

5、le network and to maximize avoid resource waste, also want to look to the future, to ensure the existing technology to the smooth transition of new network technology in the future. Build a good cable and wireless campus network solution, can greatly improve students and teachers study and work effi

6、ciency. In this article, through the analysis of the current campus network construction situation in our country, and in a comprehensive cable network and wireless network technology application, briefly introduces the wired and wireless network planning and design in school. This article mainly from the demand analysis of campus network construction, campus network construction goal, networking technical requirements, overall design scheme, equipment selection, equipment configuration, networ