智能机床外文翻译

《智能机床外文翻译》由会员分享，可在线阅读，更多相关《智能机床外文翻译（10页珍藏版）》请在毕设资料网上搜索。

1、 毕业设计中英文 翻译 学生姓名： 学号： 学 院： 专 业： 指导教师： 2013 年 5 月 机械设计制造及其自动化 原文：原文： 48.4.4 Autonomous and Intelligent Machine Tool The whole machining operation of conventional CNC machine tools is predetermined by NC programs. Once the cutting conditions, such as depth of cut and stepover, are given by the machini

2、ng commands in the NC programs, they are not generally allowed to be changed during machining operations. Therefore NC programs must be adequately prepared and verified in advance, which requires extensive amounts of time and effort. Moreover, NC programs with fixed commands are not responsive to un

3、predictable changes, such as job delay, job insertion, and machine breakdown found on machining shop floors. Shirase proposed a new architecture to control the cutting process autonomously without NC programs. Figure 48.29 shows the conceptual structure of autonomous and intelligent machine tools (A

4、IMac). AIMac consists of four functional modules called management, strategy, prediction, and observation. All functional modules are connected with each other to share cutting information. Fig. 48.29 Conceptual structure of AIMac Digital Copy Milling for Real-Time Tool-Path Generation A technique c

5、alled digital copy milling has been developed to control a CNC machine tool directly. The digital copy milling system can generate tool paths in real time based on the principle of traditional copy milling. In digital copy milling, a tracing probe and a master model in traditional copy milling are r

6、epresented by three-dimensional (3-D) virtual models in a computer. A virtual tracing probe is simulated to follow a virtual master model, and cutter locations are generated dynamically according to the motion of the virtual tracing probe in real time. In the digital copy milling, cutter locations are generated autonomously, and an NC machine tool can be instructed to perform milling operation without NC programs. Additionally, not only s