1、 毕业设计（论文） 题目名称： *9000 吨水产冷藏库制冷系统设计 1 摘要 本设计是位于郑州市的*9000t 水产冷藏库制冷系统设计。主要任务是完 成冻结物冷藏间制冷系统的设计。在本设计中首先根据冷库吨位和容积利用系 数对冷库建筑面积进行确定， 确定冷库的建筑方案和冷藏库与机房的相对位置。 然后确定维护结构的材料和传热系数，计算各种耗冷量进而根据机械负荷对制 冷压缩机机及其辅助设备进行选用，最后决定采用活塞式制冷压缩机。其次确 定制冷系统方案， 依据冷库的使用性质和它的规模来确定， 选用氨作为制冷剂， 使用氨泵供液，采用直接冷却，热氨融霜。冷间的制冷工艺设计是根据冷间冷 却设备负荷的大小及
2、冷间的性质，选择蒸发器并合理考虑冷间的气流组织，并 对制冷系统的试压、试漏、及管道的保温问题做了简单说明。 关键词：制冷系统，活塞式制冷压缩机，耗冷量。 2 Abstract This design is located in Zhengzhou City Feng Chi 9000t aquatic products cold storage refrigeration system design. The main task is to complete the Frozen Food Storage room refrigeration system design. In this de
3、sign, the first based on tonnage and volume of cold storage utilization factor for cold storage building area for sure, cold storage and cold storage building program and the relative position of the engine room. Then determine the maintenance of the structure of the material and heat transfer coeff
4、icient, calculated according to a variety of cooling consumption and thus the mechanical load on the refrigeration compressor machine and its auxiliary equipment selection, finally decided to adopt piston refrigeration compressors. Second, determine the refrigeration system solution, according to th
5、e nature and use of cold storage to determine its size, the choice of ammonia as a refrigerant, ammonia is used for the fluid pump, the use of direct cooling, the hot ammonia defrost. Cold refrigeration process design is based on the cooling equipment Cold Cold load size and the nature of choice and
6、 reasonable considering the cold evaporator airflow between the organization and the cooling system pressure test, leak testing, and pipe insulation problems do a brief description. Key words: Refrigeration system Plunger-type refrigeration compressor Cold load 3 目录 1 引言. 5 2 工程概况及原始材料 6 2.1 工程概况 6 2.2 气象和水文资料 6 2.3 建筑资料. 6 3 围护结构材料及其传热系数的确定 8 4 冷库耗冷量计算 10 4.1 冷库维护结构耗冷量. 10 4.1.1 冷库围护结构的传热面积计算见表 1-2 . 10 4.1.2 冷库围护结构的耗冷量计算见表 1-3. 11 4.2 食品冷加工的耗冷量 13 4.3 库内通风换气耗冷量 13 4.4 经营操作耗冷量 14 4.5 电动机运行耗冷
