1、 毕业设计（论文） 题 目 年产 4900 万米亚麻及其混纺织物染整厂设计 I 摘要 本设计的课题是年产 4900 万米亚麻及其混纺织物染整工厂设计。本厂生产的主产 品是亚麻棉混纺染色织物。亚麻混纺产品是亚麻发展的新形势，综合各自的优点使其具 有更好的服用性能。本厂的产品主要是连续轧染、圆网印花为主，特别注重产品的防皱 和柔软整理。 基于工厂生产的要求， 所选的设备大多是联合机， 即达到一机多用的目的， 又节约成本，节省占地面积。工艺流程的选择，车间设备的排布以主产品的工艺流程为 依据。厂区内其他建筑物的排布按照厂址的风向和就近合理的原则。本设计不仅对生产 工艺进行了深入的论证，还对设备选择，
2、人员配备，厂房形式，厂区布置，污水处理等 做了详细的说明。本设计还对概预算进行精细的计算，证明了其的可行性。 关键词：亚麻；混纺织物；工艺；设计 II Abstract The subject of this project is to design a dyeing and finishing factory with an annual output of 49 million m flax and its blended fabric.The factorys main products are flax dyeing of cotton blend fabric.Flax linen
3、blended product is the development of the new situation, integrated with each advantages and make it better wearability. Our products are mainly continuous pad dyeing, rotary screen printing-oriented, especially pay attention to the anti-crease and softening finishing of the product. Based on produc
4、tion requirements,the equipments selected mostly are combination machine, that is, which reached the purpose of a multi-purpose,but also save cost and save floor space.The reasonable selection of technological process,the arrangement of plant equipment is based on the main technological process of the product.The arrangement of other buildings within site is according to the wind direction and the principle of rational proximity.This design not only in-depth proofed the productive technology,
