1、 1 毕 业 设 计 (论 文) 专专 业业 机械设计制造及其自动化机械设计制造及其自动化 班班 级级 08 机械一班机械一班 学生姓名学生姓名 学学 号号 课课 题题 支撑架压铸模三维支撑架压铸模三维 CAD 设计设计 及及 CAE 成型仿真成型仿真 指导教师指导教师 2012 年年 6 月月 1 日日 2 支撑架压支撑架压铸模铸模 CAD 设计及设计及 CAE 成型仿真成型仿真 中 文 摘 要中 文 摘 要 首先，分析支撑架压铸件的结构工艺，提出几种不同的压铸工艺方案，计算环形浇口尺寸、弯销尺寸、 充填速度、温度、压实压力等工艺参数，完成压铸模结构设计。然后，确定模具分型面和浇注系统，借助
2、 PRO/E 三维软件，对支撑架零件三维造型，解决模具的结构设计。在此基础上，应用 CAE 软件 PROCAST 仿真支撑架充填、凝固过程，优化压铸模具结构设计。再次，绘制模具装配图、零件工程图，同时校核模 具关键零件的强度。最终表明该模具结构合理，制造工艺良好，工作稳定可靠。 关键词：压铸模；关键词：压铸模；环形浇环形浇口；弯销；分型面；口；弯销；分型面；Pro/E；CAE 3 Support frame Die-Casting Mould CAD / CAE ABSTRACT In this thesis, firstly, the structures of the Support fr
3、ame die-casting were analyzed. The structure of die casting die was designed through the analysis of various process planning and the calculations of technological parameters of ring gate, bent pin, speed, temperature, pressure, etc. Secondly, the mold parting surface and gating system must be deter
4、mined. By using 3D PRO/E software, the die-casting model and the mould structure had been drawn. On the basis, the design of die-casting mould structure was optimized through the application of CAE software PROCAST simulating the pressure filling and solidification course. Then, the Mold assembly dr
5、awings, parts drawings were drawn and the key parts intensity was checked. Finally, the conclusions show that the mold structure is reasonable, stable, reliable and the mould has good manufacturing processes. Keywords: Die-casting mould；ring gate；bent pin；mould surface；Pro/E；CAE 4 目录目录 第一章 前言 - 1 1.1 课题的提出 - 1 1.2 国内外压铸研究的现状 - 1 1.2.1 国外压力铸造业的现状 - 1
