欢迎来到毕设资料网! | 帮助中心 毕设资料交流与分享平台
毕设资料网
全部分类
  • 毕业设计>
  • 毕业论文>
  • 外文翻译>
  • 课程设计>
  • 实习报告>
  • 相关资料>
  • ImageVerifierCode 换一换
    首页 毕设资料网 > 资源分类 > DOCX文档下载
    分享到微信 分享到微博 分享到QQ空间

    楼矿1.8 Mta的矿井设计毕业设计

    • 资源ID:1425037       资源大小:872.52KB        全文页数:103页
    • 资源格式: DOCX        下载积分:100金币
    快捷下载 游客一键下载
    账号登录下载
    三方登录下载: QQ登录
    下载资源需要100金币
    邮箱/手机:
    温馨提示:
    快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如填写123,账号就是123,密码也是123。
    支付方式: 支付宝   
    验证码:   换一换

     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。

    楼矿1.8 Mta的矿井设计毕业设计

    1、 I 摘摘 要要 本设计为张双楼矿 1.8 Mt/a 的矿井设计。井田走向(东西)长平均约 8.23km,倾向 (南北)长约 3.88km,井田水平面积为 31.93km 2。主采煤层一层,即 7 号煤层,平均倾 角 8.9,厚约 5.0m。井田工业储量为 226.69 Mt,可采储量 172.53Mt,矿井服务年限为 73.7a。 矿井正常涌水量为 320m 3/h,最大涌水量为 340 m3/h;矿井绝对瓦斯涌出量为 1.84 m 3/min,属低瓦斯矿井;煤层有自燃发火倾向,发火期 36 个月,煤尘具有爆炸危险性。 开拓方案为立井两水平开采,暗斜井延深至-700m 水平。大巷采用胶带输送

    2、机运煤, 辅助运输采用 1.5 t 固定厢式矿车。 设计首采区采用采区准备方式,采用一次采全厚采煤法,全部跨落法处理采空区。 矿井采用中央并列式通风。通风容易时期矿井总需风量 4608 m 3/min,矿井通风总阻 力 2096 Pa,风阻 0.35 Ns 2/m8,等积孔 2.03m2,矿井通风容易。矿井通风困难时期矿井 总风量 4608 m 3/min,矿井通风总阻力 2746 Pa,风阻 0.46 Ns2/m8,等积孔 1.77m2,矿 井通风中等困难。 关键词关键词:立井;上下山开采;大采高;中央并列式 III Abstract The general design is about

    3、a 1.8 Mt/a underground mine design of Zhangshuanglou coal mine. Its about 8.23km on the strike and 3.88 km on the dip,with the 31.93km 2total horizontal area. The minable coal seam of this mine is only 7 with an average thickness of 5.0 m and an average dip of 8.9. The proved reserves of this coal m

    4、ine are 226.69 Mt and the minable reserves are 172.53 Mt, with a mine life of 73.7a. The geological condition of the mine is relatively simple. The normal mine inflow is 320m 3/h and the maximum mine inflow is 340m3/h. It is bituminous coal 44 with low mine gas emission rate and coal spontaneous com

    5、bustion tendency, and its a coal seam liable to explosion. The available project is vertical shaft development with two mining levels and the extension of inclined shaft go to -700m. Main roadway makes use of belt conveyor to transport coal resource, and mine car to be assistant transport. Designed

    6、first mining district makes use of the method of preparation in mining area, which uses fully-mechanized coal mining technology, and fully caving method to deal with goaf. The way of mine ventilation is centralized juxtapose ventilation.At the easy time of mine ventilation, the total air quantity is 4608 m 3 per minute, the total mine ventilation resistance is 2096 Pa, the coefficient of resistance is 0.355 Ns 2/m8, equivalent orifice is 2.03 m2. At the difficult time of mine ventil


    注意事项

    本文(楼矿1.8 Mta的矿井设计毕业设计)为本站会员(毕****文)主动上传,毕设资料网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请联系网站客服QQ:540560583,我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们
    本站所有资料均属于原创者所有,仅提供参考和学习交流之用,请勿用做其他用途,转载必究!如有侵犯您的权利请联系本站,一经查实我们会立即删除相关内容!
    copyright@ 2008-2025 毕设资料网所有
    联系QQ:540560583