1、 电力电子课程设计 三相桥式全控整流电路的研究 学生姓名: 学 院:自动化工程学院 班 级 电气工程 08.1 学 号: - 1 - 2:07:51 PM 8/2/2019 内容提要 【中文关键词】MCU ; SCR; 电力电子; 导通角; KEIL-C 【英文关键词】MCU; SCR; conduction angle; KEIL-C 【中文摘要】电子技术的应用已深入到工农业经济建设,交通运输,空间技术,国防现代化,医疗,环保,和亿万人 们日常生活的各个领域,进入 21 世纪后电力电子技术的应用更加广泛,因此对电力电子技术的研究更为重要。 近几年越来越多电力电子应用在国民工业中,一些技术先进
2、的国家,经过电力电子技术处理的电能已得到总电 能的一半以上。 本文主要介绍三相桥式全控整流电路的主电路和触发电路的原理及控制电路图,由工频三相 电压 380V经升压变压器后由 SCR(可控硅)再整流为直流供负载用。 但是由于工艺要求大功率,大电流,高电压, 因此控制比较复杂,特别是触发电路部分必须一一对应,否则输出的电压波动大甚至还有可能短路造成设备损 坏。 本电路图主要由芯片 C8051-F020 微控制器来控制并在不同的时刻发出不同的脉冲信号去控制 6 个 SCR。 在负载端取出整流电压,负载电流到 C8051-F020 模拟口,然后由 MCU 处理后发出信号控制 SCR 的(来 源:AB
3、C 论 6f 文网 )导通角的大小。 在本课题设计开发过程中,我们使用 KEIL-C 开发软 件,C8051 开发系统及 PROTEL-99,并最终实现电路改造设计,并达到预期的效果。 【英文摘要】 Following the application of electronic technology in the industry and agriculture, transportation, special technology, national defence, medical treatment, environment and daily life of people field.
4、 In the 21 century, there are appeared more and more the products of electronic technology applied. So it is important to research and practice the electronic technology in electric power field.The author is mainly to discuss the master and trigger circuit of three-phase bridge controlled rectifier (TBCR) circuit, and controlled circuit diagram. Its destination is to transpose from 380V into 500V, 650V, or 800V, and then SCR rectify the output of direct current for our sy